Another season of walnuts is about to be listed, for a walnut player, walnuts in the stubble stage of cleaning is a headache problem, I am in this stage called the bottom stage, this stage of serious completion will provide a good foundation for the future play, now I put the detailed steps and tools used to list as follows, the following steps are dry brush, I do not recommend water brush, because the season and weather of walnuts and the improper method of operation will cause walnut cracking, this dry brush method is more safe, The photos are relatively simple, and everyone ignores the level of photography...
1. Plate brush, coarse brush stage. This step is relatively untechnical, the purpose is to brush off the floating dust and the surface is easy to clean things, the larger the brush used, the better, so that it is more labor-saving, brush evenly.
(The mini program has been added here, please go to today's headline client to view)
2. Bristles hard brush, coarse grain cleaning stage. This stage uses black bristle brush is the most common, but also the most mixed brush, some people say that this brush is too oily, the bottom stage is easy to brush black walnuts, this matter is benevolent and wise, I do not comment, after all, I have not used such a brush to brush black walnuts. The main topic is that the brush hair is relatively loose and not tight, you can initially brush to the walnut crevices of the remaining things, as well as some white tendons, the texture of the hair is hard, and it is also helpful for the rough polishing of the leather at the beginning.
3. Scalpel blade, shaving needle, fine cleaning stage. Speaking of the use of shaving needles, we will certainly not be unfamiliar, shave off the white tendons on the walnuts all rely on this brother, but there will often be black or gray things in the gap is quite difficult to clean, not to go down the water, or wet brushes can not go down at all, so this stage will use the scalpel blade, scalpel blade and shaving needle in this stage of the use must remember to be fine, do not hurt the skin, although in the future days some wounds can be smoothed, but can be careful as much as possible to be careful, The first time may be more time-consuming, but if the first time is very serious, then the next few times are basically to check the gaps and fill in the gaps.
4. Fine hard bristle toothbrush, fine brush texture. This stage is the focus, the choice of brush is also very important, toothbrushes everyone has, but many toothbrushes can not play the purpose of fine brush texture, there are several reasons, one is that the arrangement of hair is too tight, so that the hair can not go deep into the gap, the second is that the hair is too hard and thick, and it is also impossible to enter the various lines. Here I recommend that you use a medium-hair toothbrush, preferably wavy, and it is best to be hard, thin and loose.
5. Fine soft bristle toothbrush, dust removal stage. This stage is the aftermath of the work, after the previous toss, the surface of the walnut will definitely have a lot of electrostatic ash, at this time it will be necessary to use an ultra-fine and ultra-soft toothbrush, more dust, rub a blow and blow will all be done, ordinary toothbrushes can be competent, soft hair, loose for the best.
Well, about my own summary of the walnut dry brush method is written here, so that cleaning a week or so can be played at will, usually as long as you repeat 4, 5 two steps to keep the walnut daily clean.
Word by word typed on, for a person who usually does not even bother to open the computer is not easy, everyone sprays gently, where to find clean walnuts? To be created by labor...............
Finally attached is the tool family portrait: