Learn to drive and take the driving test on the spotted driving track
Practice reversing into storage a hundred times, either pressing the angle or pressing the line. I obviously feel that I can pour it in, but as soon as I get started, it is not right, why is this?
We must know that when reversing into storage, every point is meaningful and cannot be "based on feeling"
For example, when leading the line, the point must be accurate, too wide or too narrow may affect the subsequent operation. (Of course, this point is not very strict)
But more importantly, we need to know that due to different speeds, heights, angles of looking at points, etc., there will be errors in points
If you want to reverse into the warehouse without accidents, you must learn "how to make up for these mistakes"
Banban summarized several non-standard situations of reversing and warehousing.
<1> What should I do if I reverse?
This situation is caused by the first point being played early.
At this time, the body will be very oblique, that is, the typical oblique plug library is formed.
At this time, if you return to the right place, you will definitely not be able to enter the warehouse normally, and you need to correct the body, so you must return to the steering wheel first
Then wait until the door handles are in storage, and then fill them in the opposite direction to adjust the body condition.
<2> What should I do if I reverse into the warehouse early?
Being a little earlier is actually the same as playing early, that is, to go back a little first, because if you return to the right, you will enter the warehouse diagonally
It is necessary to make sure that the body is positive after warehousing, so it cannot be completely corrected.
Wait until you're in storage, then go back to the steering wheel. Actually, the principle is the same.
<3> What should I do if I am late for the left inverted library?
Playing late is the exact opposite of playing early. When the body is already parallel to the garage, but it is clear that one side is wide and the other is narrow.
In this case, once you continue to reverse the car, you will immediately press on the other side.
So keep the steering wheel still! (that is, to keep the state of killing), so that the tail of the car will go to the wide side, so as to ensure that the side is not narrowed.
Wait until the car is fully stored, and then return to the steering wheel when the body is right.
<4> What should I do if I am late for the right inverted library?
The principle of fine-tuning when the right inverted library is late is the same as that of the left inverted library.
To sum up, it is no longer difficult to reverse the car into the warehouse, and you must understand how to make up for and fine-tune the mistakes in the reversing, otherwise you must ensure that the action, angle and even line of sight of the point are 1:1 replication.
END