First, learn to understand the GB of mapping
The ability to read drawings is the basic skill of design, which is equivalent to the language of the designer, and it must be solid, and the drawing courses in college must be learned well.
2. Learn a 3D and 2D software
solidworks software and UG, SOLIDWORKS will be more in non-standard mechanical design, and the mistake of learning software is not to learn too many commands, but to learn drawing skills and ideas. For example, the most commonly used mechanical design is stretch excision. Surfaces are hardly used.
3. Learn common standard parts for machinery
As long as the machine is assembled from various parts, the selection of the application type characteristics of all standard parts, such as bearings, fasteners, and profiles, is very important
Fourth, learn the application and selection of purchased parts
Purchased parts such as lead screws, sensors, guide rails, belts, and chains are all important structural parts that make up an equipment, so they need to be applied, selected, and checked.
5. Pneumatic technology
Because the cylinder should be used in every equipment, the cylinder includes the selection of various components such as cylinder, solenoid valve, triplet, circuit design and the design of the overall circuit
Sixth, the study of motors and modules
The motor is the main driving force of a device, including servo, stepper ordinary motor, etc., which is also particularly important for motor selection, as well as basic motor characteristics. Modules are integrated structures that also need to be learned.
Seventh, the study of mechanical technology
The process will include the processing process, the assembly process, and whether it can be processed and assembled in the design of the part.
Tolerances & Fits & Material Surface Treatment
The tolerances of the parts assembly and processing will be considered, as well as the application of materials, each part is different.
9. The design idea of the whole machine
The design idea of the whole machine feels very ethereal, I don't know where to start, now learning is imitation, to put it bluntly, it is copying. Hahahaha
There is also a full set of materials here to help you learn non-standard mechanical design by yourself
Need information private message reply: 6666
All of the following information is attached