laitimes

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

author:See the world at will

On April 28, the surging news reported that on the morning of April 27, a serious traffic accident occurred in the Gaoyang Town section of Shayang County, Zaoshi Expressway, Hubei Province.

Details are shown in the following video:

Loading...

According to the description of the deceased's friend, the speed of the car was about 30 meters per second, 108 kilometers per hour, the car was only twenty or thirty meters away from the maintenance vehicle, the distance between the conical barrel and the maintenance vehicle was less than 50 meters, and three conical barrels were placed.

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

To be honest, the distance between this speed and the time was equivalent to a collision when he reacted, but he hit the steering wheel so that the co-pilot did not directly hit the maintenance car, saving the co-pilot, but he died on the spot.

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

The non-standard placement of the conical barrel is the main reason, and the excessive speed of the car is also one of the reasons for this tragedy, although it is a fast lane, but the speed of 108 kilometers per hour is also very fast, or in the corner, the field of vision is also limited, and the situation at that time is too late to react.

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

There have been more than one traffic accident due to the non-standard placement of the conical barrel of the high-speed maintenance vehicle operation, and it is hoped that the operator can take this as a warning and respect their own lives and the lives of others.

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters
Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters
Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

This netizen suggested that the maintenance personnel should be trained before taking up their posts, and I also suggested that it is feasible to support, and professional people do professional things.

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters
Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

Some netizens said that the maintenance car is fully responsible, and the division of responsibility has to wait for the traffic police to decide, it is said that the deceased's family is more difficult, and I hope he can be properly handled.

Zaoshi high-speed car crashed into the maintenance truck, and the driver died on the spot, suspected to be because the conical barrel was placed less than 50 meters

The speed of the car on the highway is very fast, and it can brew a tragedy in one second, whether it is an engineering vehicle or a maintenance vehicle, it should be standardized to place a conical barrel. Drivers should also maintain a safe speed and should not drive too fast!

(The picture comes from the Internet, invaded and deleted)