In today's wave of "square box fever", how to create unique products has become the key for automakers to win potential consumers. A few days ago, BAIC Motor launched the new BJ40 blade hero version of the "Climber", with full-time four-wheel drive + three locks, and a 4.0 high-speed ratio brake, adding professional-level off-road players to this lively market segment.
The new BJ40 Blade Hero Edition focuses on "extreme off-road", and the gasoline version of the model "Climber" on the market this time has been comprehensively improved in terms of hard-core off-road configuration, with an official guide price of 189,800 yuan.
The all-new BJ40 Blade Hero Edition adopts more rigid and aggressive lines, and the specially built professional off-road suspension increases the overall body height by 20mm, making it look more burly and straight. The new car has blackened D-shaped windows and door handles, and all models are equipped with metal lower guards as standard, which brings a fierce and ferocious visual impact.
The new car adopts a three-section roof design, which supports quick disassembly and assembly, and the top cover can be put into the trunk to enjoy the fun of "open-top off-road" outdoors. The roof also adopts two seals + drainage pipe design to ensure that there is no water leakage in rainy days, and the front and rear bars and wheel eyebrows of the vehicle can be quickly disassembled, which improves the modification space and playability. In addition, the new car is also equipped with a 2.5-ton traction qualification and power port as standard, further expanding the outdoor life scene.
The all-new BJ40 Blade Hero Edition has a 38° approach angle, a 36° departure angle and a 28° pass angle, a maximum wading depth of 800mm, and AT tires with excellent grip, so that off-road enthusiasts can enjoy the passion and freedom of off-roading.
The new car adopts the "40 family" unique built-in roll cage, the torsional rigidity of the ring cage body reaches 16000N/m, the top compression resistance is 130000N, the maximum yield strength is more than 1350MPa, the highest tensile strength is more than 1500MPa, and 79.8% hot-stamping steel and high-strength steel. The all-new BJ40 adopts the first body hydraulic expansion technology and racing-grade pipe beam structure, the hydraulic expansion pipe beam uses 780Mpa high-strength steel, and the expansion hydraulic pressure reaches more than 200Mpa to ensure the safety of the vehicle when the vehicle rolls over unexpectedly in off-road scenarios.
In the safety test conducted by BAIC Automobile a few days ago, the new BJ40 Blade Hero Edition can withstand the fall of a 1-ton 10-meter-long broadsword, the top b-pillar cross-section is concave, the main driver's door is slightly deformed, and the vehicle can start driving; three times the knife mountain hits the co-pilot B-pillar position, the body has a slight depression, the roll cage is not damaged, and the vehicle can still start driving; the 18-meter-high cliff side falls, during the fall two weeks overturned and falls to the ground, the airbag is deployed, and the landing can not only be ignited and started, but also has a certain off-road performance.
In addition to body safety, the all-new BJ40 Blade Hero Edition "Climber" has also been fully strengthened in terms of power and professional off-road configuration. The new car is equipped with the first 4.0 large speed brake in China, using electronic control design, with a faster and more accurate switching ability, can be locked/unlocked anytime and anywhere, compared with the traditional chain structure transmission, higher reliability, stronger impact resistance.
In terms of power, the new BJ40 Blade Hero Edition "Climber" is equipped with a 2.0T+8AT powertrain, with a maximum torque of 10,250 Nm at the wheel end, which is 60% higher than the torque of the conventional transfer case, and at the same time can reduce the minimum stable speed by 60% to obtain a more stable low-speed and high-torque output, which improves the performance of the vehicle in extreme scenarios such as climbing, climbing, and getting out of trouble.
The all-new BJ40 Blade Hero Edition "Climber" is also equipped with 11 ATS all-terrain driving modes developed by BAIC as standard, and 4 new professional driving modes are added: deep snow, rock, traversing, and wading.
With the launch of the new car, BAIC Motor simultaneously launched the "Eight Gifts of Dengfeng", including a deposit of 3,000 yuan to 10,000 yuan for the purchase of a car, a variety of financial solutions such as 150,000 low interest for 3 years and 100,000 interest for 2 years, a subsidy of 15,000 yuan for the replacement of this product/other products, and a subsidy of 10,000 yuan for additional purchases (the old car is not limited to brands).