Again
The front and back of the big truck
There are different degrees of blind spots
In order to avoid potential dangers
Pedestrians and non-motorized vehicles should be kept away as much as possible
At the same time in the process of driving
Pay attention to the surrounding road conditions
Don't make a U-turn or change lanes at will
At noon on March 6, 2024, Dong drove a heavy-duty semi-trailer tractor, and when he drove east to west along Jinzhang Road in the urban area to the entrance of the Jinxin Expressway ramp, he made an illegal right turn and made a U-turn, colliding with a two-wheeled electric bicycle traveling in the same direction on his right.
Accident identification The accident police of the first brigade of the Jincheng Public Security Traffic Police determined that in this accident, Dong violated the relevant provisions of Article 49 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" and was fully responsible for the accident. Relevant legal provisions: Article 49 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China Motor vehicles shall not make a U-turn at locations with signs and markings prohibiting U-turns or left-turn turns, as well as at railway crossings, pedestrian crossings, bridges, sharp bends, steep slopes, tunnels or dangerous road sections. Motor vehicles may make a U-turn at a location where there is no prohibition on U-turn or no sign or marking prohibiting left turning, but it shall not obstruct the passage of other vehicles and pedestrians in normal driving.
A lot of traffic accidents happen
It is all caused by the driver's blind spot
Especially for large vehicles, there will be more blind spots
So we need to know
Another knowledge point - the inner wheel difference
The so-called inner wheel difference refers to the difference between the turning radius of the front inner wheel and the turning radius of the rear inner wheel when the vehicle turns. Due to the existence of "inner wheel difference", the movement trajectory of the front and rear wheels does not coincide when a large vehicle is turning.
It can be seen that you have strayed into the blind spot, such as facing the abyss
Learn to avoid blind spots
It's necessary!
The key to avoiding blind spots in large vehicles is to keep these points in mind
Large Vehicle Driver ►
During the turning, reduce the speed of the vehicle, turn on the turn signal or honk the horn in advance, turn the big corner as much as possible when turning, take the initiative to slow down or stop to observe, and do not just think about racing against time.
E-bikes, bicycle drivers and pedestrians ►
Be sure to keep enough lateral distance from the truck, and never drive or stop in front of the large truck. You should try to stay away from the large truck that is turning or preparing to turn, do not enter the intersection at the same time as the large truck, do not accelerate and try to rush from the front of the turning truck, and wait for three minutes rather than a second.
All in all
in everyday life
Please don't go head-to-head with "Big Brother" and stay away in time and go your own way
Do not fight, do not grab, take the initiative to be polite
Ensure safe and civilized travel
Contribution: Traffic Police Brigade Editor: Tian Jing Proofreader: Zhang Shasha Editor: Han Yu Issued: Wang Guanghui
Submission email: [email protected]