【Tech Dogs】
The all-new Baojun Yue Plus was launched, with a total of two models, the flagship version and the intelligent driving version, priced at 93,800-103,800 yuan.
The car is positioned as a small pure electric SUV, with a five-door four-seat square box design, although it follows the name of Baojun Yueye, it is not simply elongated, but a rebuilt front-wheel drive SUV for the main family (Yue is also rear-wheel-drive).
The car is based on Baojun's new platform architecture, using the "Square Box+" design language, using classic urban zebra headlights and track rear taillights, continuing the family's four-horizontal and four-vertical styling layout, the new car will also launch five new trendy car colors, named Cloud Gray, Cloud Sea White, Sky Blue, Aurora Green, and Space Black.
The length, width and height are 3996 * 1760 * 1726 mm, the wheelbase is 2560mm, the ground clearance is 150mm at full load, and the turning radius is 5.35m.
The interior of the new car offers two color schemes, the overall is relatively simple, equipped with a full LCD instrument cluster and a three-spoke multi-function steering wheel, the central control is also suspended, and the air conditioning outlet adopts a rounded corner design, and the visual effect is softer.
The official also said that the new car uses low-emission odorless 3D Mesh advanced environmental protection materials to achieve full coverage of high-frequency contact areas such as instrument panels, four-door armrests, and seats, and improve the texture, and the front and rear seats are made of ultra-soft and thick memory foam, with independent headrests as standard, and the main driver is equipped with 6-way electric adjustment as standard, and the co-driver is equipped with 4-way manual adjustment.
Although the size is not large, but the new car in the design of the focus on the whole car, the leg room has been optimized design, the whole car has as many as 28 smart storage space, the original volume of the trunk space is 385L, the rear seats can be 5/5 points of independent reclining, fully flat after the maximum volume of the trunk can be expanded to 1715L.
It is worth mentioning that the Yueye Plus intelligent driving version is equipped with the latest generation of smart driving jointly developed with DJI Vehicle, which is delivered in mass production, and is the only non-map city memory navigation assistance that is mass-produced and delivered within 200,000 yuan, and also hits the high-end intelligent driving to the level of 100,000 yuan.
In terms of power, the Baojun Yue Plus is driven by a front-mounted single motor, which can output 102 horsepower (75 kW), has a top speed of 150km/h, is equipped with a 41.9-degree battery, and has a CLTC pure electric range of up to 401km.
A few days ago, Mercedes-Benz (China) Automobile Sales Co., Ltd. filed a recall plan with the State Administration for Market Regulation.
As of April 12, 2024, the following vehicles are being recalled.
1. A total of 2,790 imported E-Class, CLS and AMG GT vehicles with production dates between November 24, 2021 and March 10, 2023 will be recalled.
2. A total of 89,674 imported GLE SUVs and GLS SUVs with production dates between July 5, 2018 and January 7, 2023 will be recalled.
In some vehicles within the scope of this recall, the grounding bolts of the battery grounding wire installed in the engine compartment may not be properly tightened, resulting in an increase in grounding resistance, which may cause the temperature to rise and pose a risk of fire if a large current is passed.
The after-sales service will inspect and tighten the grounding wire fixing bolts for the vehicles within the scope of the recall free of charge, and replace them if the relevant parts are damaged to eliminate potential safety hazards.
3. A total of 79 imported GLE SUVs with production dates between May 3, 2023 and May 10, 2023 will be recalled.
The accelerator pedal module bracket of some vehicles within the scope of this recall is not firmly welded to the body, and after long-term use, the accelerator pedal module may be separated from the body, resulting in the normal use of the accelerator pedal.
In extreme cases, the accelerator pedal may be stuck between the body and the brake pedal, affecting the use of the brake pedal and posing a potential safety hazard.
The aftermarket will replace the affected solder joints of the accelerator pedal module brackets of the vehicles covered by the recall with rivets to eliminate potential safety hazards.
Note: The above comprehensive information comes from Fast Technology