Computers are an indispensable office equipment in our lives and work, but sometimes we may encounter the problem that although the computer has successfully connected to the network, it cannot open any web pages. So, what exactly is causing this problem? This article will provide some solutions to help you solve this annoyance.
1. Check whether the network connection is normal
One of the most basic conditions for your computer to access the Internet is to have network support, make sure that your computer is properly connected to the router or Wi-Fi network, and that the signal strength is good. You can try disconnecting and reconnecting from the network, or restarting your router to fix possible network connection issues.
2. Update the NIC driver
The NIC driver is a key step in determining whether the network can run normally, if the NIC driver is not updated or outdated, it may also cause the network to be unable to access the Internet when there is a network display. In order to get you to the web page faster, it is recommended that you can use Driver Life to update the network card driver.
1. Open Drive Life on the computer, and check the status of the network card in "Comprehensive Diagnosis".
2. If the NIC is abnormal, update and upgrade the driver in "Driver Management", and click the "Upgrade Driver" button.
3. Wait for the driver to help you update to the latest version of the network card driver.
3. Check the firewall settings
A firewall is an important part used to keep your computer safe, but sometimes it can also prevent certain web pages from opening.
In the Windows operating system, you can go to the Control Panel, find and click on the "System & Security" option, and select "Windows Defender Firewall". In the firewall settings, you can try turning off the firewall or adding an exception rule to allow specific web pages to load.
4. DNS server issues
The DNS server is responsible for translating the domain name into the corresponding IP address, which enables us to access a particular web page. When the DNS server fails or is not configured correctly, it may result in the failure to open the web page.
In the Windows operating system, you can open the Command Prompt and enter the ipconfig /flushdns command to flush the DNS cache and try to fix the DNS problem.
5. Browser Settings
Sometimes, your browser's settings can affect how a web page loads properly. You can try clearing your browser cache, disabling extensions, or resetting your browser settings to eliminate these potential issues.
Also, it's important to make sure your browser is up to date, as newer versions usually fix some known bugs and issues.
The above is the introduction of the reasons and solutions for the computer to have a network, but it can't open the web page. Hope it helps. If you encounter problems related to the network card, graphics card, Bluetooth, sound card, etc., you can download "Drive Life" for detection and repair, and at the same time, Drive Life supports driver download, driver installation, driver backup, etc., and you can flexibly install drivers.