Beijing Aisen Tank 300 brush ECU to increase power
As the leading model of the tank brand, the Tank 300 City Edition not only ensures the attributes of a hard-core SUV, but also takes into account the comfort of an urban SUV. In terms of practicality, the Tank 300 City Edition is also remarkable, with a high ground clearance and an electrically retractable pedal, which not only ensures passability but also takes into account the convenience of getting on and off the car, and a variety of storage compartments in the car also make the belongings have a "safe place". The success of this car has made the young brand of Tank stand out, quickly entered the public eye, and even appeared in a hard-to-find sales boom, and the protagonist of today's operation is this tank 300 with both soft and hard.
Beijing Aisen Tank 300 upgraded ECU to improve gear shifting
Beijing Aisen Tank 300 brush first order
In terms of power, the Tank 300 is equipped with a 2.0T turbocharged engine codenamed E20CB, with a maximum power of 167kW (227Ps)/5500rpm and a peak torque of 387Nm/1800-3600rpm. Consistent with the current VV6 and VV7, it has the technical characteristics of a new generation engine such as a 350 bar fuel injection system and a dual-channel turbocharger. The powertrain is mated to a longitudinal 8-speed automatic transmission from ZF and is equipped with an electronically controlled time-sharing all-wheel drive system from BorgWarner. For a hard-core SUV, its value is not limited to urban use, in order to better face complex road conditions, sufficient power reserve is also essential, especially the car in the start and rapid acceleration of power lag, high-speed power attenuation and other phenomena are still very significant, in order to expand the best power and handling of this car within the safety range, one-to-one customized brush ECU is a good option.
Why can Beijing Aisen Tank 300 upgrade ECU improve power?
First of all, the whole car is systematically tested to ensure that the vehicle is optimized and upgraded in a healthy state, and then the road test equipment is installed to collect the log information in the vehicle driving, so as to provide the most accurate vehicle operation information for foreign programmers;
Automobile manufacturers will control the ECU program in the most conservative state of the factory, because the manufacturer does not know where his vehicle is sold, the local climate, temperature, oil quality, driving habits, maintenance habits of the driver will be different. In order to ensure that the vehicles produced by ourselves can withstand the most demanding environments and still work for long periods of time. Therefore, the original car will have 5%~30% of the power will be retained and limited, so as long as the optimization within a reasonable range, regular maintenance, brushing ECU is the most cost-effective and safe performance upgrade project.
In addition, the problem of fuel consumption, which is greatly affected by objective factors, after all, the overall driving control after the upgrade will be quite different from before, many models are more fuel-efficient after brushing ECU, and the effective power of the engine in the time unit is increased compared with the original. When running the same distance, the time to press the gas pedal will be reduced compared to before. For example, the torque that used to take 2/3 of the throttle to generate is now reached with only 1/3 of the throttle. This is because upgrading the ECU is an improvement in energy efficiency, not simply an increase in output power. This is a misconception that many people nowadays mistakenly think that brushing the ECU will consume fuel. Another point is that flashing the ECU program actually improves the driving pleasure. It's not the same as going fast, speeding. In addition to the increased horsepower, it also increases the car's handling. It's not about you to boost your horsepower to break through the limit, it's about having fun driving at legal speeds.
Beijing Aisen Tank 300 Upgrade ECU Actual Effect
The overall operation time is about three hours, and the customized program has been implanted into the engine computer, and after passing the system detection of the whole car, the log information collection of the road test is carried out again to revise the rationality of the program optimization.
The actual road test results are summarized as follows:
1: Considering the high pressure value of the original factory, the pressure value is constant at 1.5Bar after upgrading, which is safe and stable. And the original power linear attenuation after 3700rpm has been perfectly repaired, so that the overall performance continues to maintain a strong output. Through reasonable customization and optimization, the car can be felt more lightweight at the start, acceleration is always available, the acceleration feeling continues to be linear, the previous low-speed and rapid acceleration power lag phenomenon has been well improved, and the power improvement of the entire speed range is very significant, the same speed does not need higher speed;
Second: the shift logic is clearer and smarter, the shift is more positive and smooth, the power and handling upgrade and the overall driving control is more linear;
Three: the sound is more deep and deep, and the tank 300 brush ECU upgrade improves the power to improve the cost performance and safety of gear shifting.
Beijing Aisen Tank 300 brush ECU is guaranteed
As the saying goes, "motivation is like money in your pocket, you can do without it, but you can't do without". Brushing ECU is currently the most direct, effective, safest and most economical modification method in automotive power modification. The optimization and upgrade of the ECU is to give full play to the more accurate calculation of the car, that is, to accelerate the speed of ECU calculation, after the ECU upgrade, it will only improve the combustion efficiency of the engine, and will not cause any harm to the engine, but also increase the driving pleasure and make the driving more targeted.