laitimes

Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router

author:What is worth buying

This content comes from @What is worth buying APP, and the views only represent the author's own |Author: Aircraft repair brother

Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router

Dimensions 165 x 34 x 134.8 mm

It's time to pick up garbage again, today I will introduce a small volume of 165*134*34mm small network equipment, at present, 50 free shipping a lot, buy it back and plan to cooperate with N1 to make a network management switch. Thinking that I had nothing to do to pick up garbage and play, I bought this SD-WAN device to use to play with OpenWRT, so I bought a toy. The CPU is P1010, and the measured performance is slightly stronger than MT7621. But there is a small problem with this device, that is, WAN is a network card, and LAN 4 port is a network card. Please be aware that being a network management switch is equivalent to a dual-port device. I'm here purely for tossing, if you don't need it, please avoid the pit.

Flashing tutorial

USB to Console cable to connect the Console port in the XSHELL software

Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router
Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router

The COM port here is determined according to its own port.

Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router

When the above screen appears, press F Enter

Enter fw_setenv bootdelay=3 and restart.

The countdown is interrupted by pressing enter when the boot is started.

Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router

Enter the code below

setenv bootargs_owrt "setenv bootargs console=ttyS0,115200"

setenv bootcmd "run bootargs_owrt; nand read 0x1000000 0x300000 0x800000; bootm 0x1000000;"

saveenv

The computer network cable and the router WAN port are connected, and the fixed address of the computer is 192.168.1.2 kernel.bin

https://firmware-selector.openwrt.org/?version=23.05.3&target=mpc85xx/p1010&id=sophos_red-15w-rev1

Download the TFTP32 software, put the kernel.bin into the TFTP32 folder, and open TFTP32

Pick up garbage 50 yuan gigabit openwrt network management switch, and you can also make a router

Enter under xhell

run bootargs_owrt; tftpboot 0x1000000 192.168.1.2:kernel.bin; bootm 0x1000000;

Then enter the code below to free up all NAND space

ubiformat /dev/mtd4 -y

After that, reboot and enter 192.168.1.1 to enter the OP background, if you need immoralwrt, find the firmware of the sysupgrade of Sophos Red15W and upgrade it in the background.

Enjoy your OpenWrt

Read on