Huizheng Information:
With the continuous improvement of people's living standards, the decoration standards of every household are also constantly improving, and high-standard and high-grade decoration materials are emerging in an endless stream. As the first choice for the finishing layer of kitchen and bathroom walls and floors in living rooms, ceramic tiles are becoming more and more sizeable, the water absorption rate is getting lower and lower, and the material is becoming denser and denser. Due to the wide variety of ceramic tile types and sizes in the construction market, there is also a wide variety of ceramic tile bonding materials, and the choice of materials that are both safe and economical is a common expectation of all consumers.
According to the current standards and specifications, tile adhesive is mainly divided into C1 grade and C2 grade two grades, 600 * 600 and below glazed bricks (soaking bricks) on the market can be directly used Oriental Yuhong Huasha C1 grade (TA-S100 and TA-S102) tile adhesive for bonding.
For the frequency of more and more low water absorption vitrified bricks, because of its own denser, the direct bonding effect with tile adhesive is not good, for which we also specially provide supporting materials vitrified tile adhesive, one day in advance on the back of the tile to coat 1mm thick adhesive, can greatly increase the adhesion between ceramic tiles and tile adhesive. After such treatment, the vitrified bricks of 600 * 600 and below the size can be bonded with Oriental Yuhong Huasha C1 grade (TA-S100 and TA-S102) tile adhesive, and for the vitrified bricks greater than 600 * 600 after the Huasha vitrified brick adhesive treatment, you can choose to use Oriental Yuhong Huasha C2 grade (TA-S106 and TA-S115) tile adhesive for bonding, and the selection can be guaranteed to be both economical and safe according to this idea.