Extreme MATX steel cannon, MSI B760 Mortar II + Inchi 4070 Metal Master + COOJ Z-18 installed

preface

Today, install a delicate MATX steel cannon, choose COOJ Prime Minister Z-18 anode silver chassis, using one-piece molded shell, aluminum alloy CNC process, the motherboard side uses side through glass, can better display the internal hardware and lighting effects, the chassis size is 340 mm × 170 mm × 315mm, 18.2L, air-cooled radiator height limit 138mm, support 240mm water cooling, graphics card length limit 328mm, support SFX/SFX-L specification power supply. The installed hardware platform is i5-13600KF + B760 + RTX 4070, the motherboard is selected MSI MAG B760M MORTAR WIFI II DDR5, silver and white color matching, similar to the chassis style, the memory is matched with Kingston Fury Beast EXPO DDR5 RGB 6000 16GB × 2, the graphics card chose the Inchi GeForce RTX 4070 Metal Master OC, matte design but excellent texture, In terms of heat dissipation, the integrated water cooling solution is selected, the Xianma XW240D black is selected, the water block head has a screen with a customizable screen, which can be personalized display, the power supply is selected Almordor SFX 750W Gold Medal full module power supply, the conversion rate is up to 90%, and the standard SFX size design comes with a 5-year warranty.

Configuration checklist:

• Processor: Intel i5-13600KF
• Motherboard: MSI MAG B760M MORTAR WIFI II DDR5
• RAM: Kingston Fury Beast EXPO DDR5 RGB 6000 16GB × 2
• Graphics card: Inchi GeForce RTX 4070 Metal Master OC
• SSD: Hitus Ti Plus 7100 1TB
• Heat sink: Xianma XW240D black
• Fan: Limin TL-B9
• Fan: Limin TL-C12015 × 2
• Power supply: Almordor SFX 750W
• Chassis: COOJ Prime Minister Z-18 Anode Silver

Whole machine display

The whole machine is displayed from multiple angles.

Motherboard side.

Dorsal line side.

The top cover is fixed by magnetic suction, and a black 6mm thick aluminum alloy CNC top cover is adopted, and a grille is opened to facilitate heat dissipation.

Front button and interface, from left to right, power switch, USB 3.0, Type-C 10GB.

The grille design on the top is all CNC process, which is extremely delicate.

Design elements on the front panel.

Vents on the sides.

At the rear of the chassis, the upper left corner is the power interface, the lower part is the motherboard interface area, and the right side is the rear fan vent.

Graphics interface area, with sunken IO design.

Overview of the bottom of the chassis.

Chassis padding details.

Cutouts at the bottom.

The main hardware inside the chassis is displayed.

Water block with screen, good picture display.

Memory lighting effects.

The exhaust fan light effect is turned ice blue.

Graphics card section.

Remove the one-piece molded housing for a glance of the internal frame of the chassis.

Overview of the motherboard side.

View of the dorsal side.

A list of the main internal components.

Motherboard side details.

240 radiator and fan.

Cold head with screen.

A Limin TL-B9 exhaust fan is installed at the rear of the chassis.

Memory section.

The motherboard 24Pin is routed, and the white network cable has a good effect after combing.

Graphics card section.

On the back of the graphics card, a metal backplate is used.

The graphics card power supply traces.

The convection penetration design on the front of the graphics card can quickly take away heat and improve heat dissipation efficiency.

At the top is 240 cold radiators.

Power supply bit, power supply fan facing outward.

Z-18 basically does not have a back wire space, and the power supply line and chassis jumper need to be combed and then walk the back side of the power bracket to achieve a better wiring effect.

There is a certain amount of hidden wire routing space on the back of the power shelf.

Bottom.

Motherboard interface area and rear fan bits.

Accessories display

Intel i5-13600KF.

MSI MAG B760M MORTAR WIFI II DDR5, motherboard front, standard MATX form factor, the appearance continues the mortar's consistent design language, black PCB with silver and white heat dissipation armor, surface treatment including metal matte and metal brushed, full of texture and design.

The back of the motherboard, black PCB, the surface treatment is very clean, and the solder joints are full.

The silver-white full-coverage VRM heat dissipation armor adopts a combination of brushed and frosted processes on the surface, with MSI logo in the upper left corner and grille-style painted decorative strips on the right.

CPU socket.

LGA 1700 pin.

The power supply part adopts 12 (75A) + 1+1 intelligent power supply, and the materials are solid.

Dual 8Pin CPU power supply interface.

Equipped with 4 DDR5 memory slots, supporting dual channels, and with memory acceleration engine, DDR5-7800+ MHz (OC) can be achieved.

In the lower part of the motherboard, it is obvious that the number of M.2 slots has increased to 3, and the chipset and the first/third M.2 are equipped with independent silver-white heat sinks. 2 PCIe slots, the first PCIe 5.0 x16 reinforced with steel armor and the second PCIe 3.0 x4.

Independent chipset cooling module, the surface is equipped with several diagonal slots, increase the aesthetics while also improve the following heat dissipation effect, the overall is very designed, the motherboard model MORTAR II is marked above.

The integrated sound card is a 7.1-channel Realtek ALC 897 HD Audio Codec.

In terms of I/O ports on the rear of the motherboard, it provides 4 USB 2.0 Type-A, 1 DisplayPort and HDMI for core display output, 3 USB 3.2 Gen2 10Gbps (Type-A) and 1 USB 3.2 Gen 2x2 20Gbps (Type-C), 1 2.5Gb LAN port, antenna connection of wireless cards supporting Wi-Fi 6E, and 5 3.5mm+1 S/ PDIF optical port audio interface combination.

Isolation cable with integrated sound card section.

Various certification marks.

The motherboard is a 6-layer PCB.

Kingston Fury Beast EXPO DDR5 RGB 6000 16GB × 2 set, identical in appearance to the XMP version, with Fury on the left, Beast Beast on the right, and DDR5 in the upper right corner.

Memory front.

Memory back.

The light guide tape at the top of the memory is printed with the word Fury.

Actuation Ti Plus 7100 1TB.

Yingchi GeForce RTX 4070 Metal Master OC, standard metallic gray shell with black fan, integrated cast aluminum alloy upper cover, surface with non-standard lines, craftsmanship including CNC high-gloss edge, metal brushing, matte surface, etc., full of texture.

On the back of the graphics card, an all-metal back plate is adopted, the surface adopts a metal wire drawing process, and the front adopts a through-air duct design to facilitate ventilation and improve heat dissipation capacity.

The effect of the graphics card standing up.

GEFORCE RTX LETTERING.

GALAX logo。

8pin graphics card power supply interface.

The fan part, triple-fold fan blade design, supports intelligent fan stagnation.

The details of the back panel, the whole is made of metal brushing, the texture is very strong, and the surface is embellished with lines to increase the sense of design.

The front penetrating hole ensures the chassis air duct and improves the heat dissipation capacity.

Almordor SFX 750W, Gold full module power supply with up to 90% conversion rate, standard SFX size design, with a 5-year warranty. On the top of the power supply, there is a nameplate sticker detailing the ability of input and output.

On the side of the power supply, there is the Almordor logo.

Power supply tail.

Full module interface part.

Xianma XW240D black.

The cold head part, using all aluminum alloy CNC cover, surrounded by high-gloss decorative texture, excellent finishing texture, and with a high-definition IPS screen, 2.1 inches, 480×480 resolution, can use SamaMonitor software for screen customization.

Large area of copper bottom.

The cold radiator part, 27mm thick design, the internal 20mm thick waterway to ensure heat dissipation performance, pre-installed with 2 Xianma XT128D fans.

COOJ Prime Minister Z-18 Anode Silver, using one-piece shell, aluminum alloy CNC process, minimalist appearance, without any exposed screw design.

On the side of the chassis, there is a window design on the left side, and the tempered glass is very transparent.

On the other side, there are heat dissipation holes for easy ventilation above and below.

Fuselage frame.

45° viewing angle.

Performance testing

CPU-Z screenshot.

CPU-Z running score test.

GPU-Z screenshot.

Cinebench R23 test results, CPU multi-core 24195 pts.

Cinebench R23 test results, CPU single-core is 2022 pts.

SSD performance testing.

The 3DMark Fire Strike Extreme score is 20943, and the graphics card score is 21933.

The 3DMark Time Spy score is 18199 and the graphics score is 18398.

The 3DMark Port Royal score is 11389.

AIDA64 FPU copy machine test, i5-13600KF P-core 5.0Hz, E-core 3.9GHz, test for 10 minutes.

CPU P-core core average temperature: 69°C 69°C 69°C 68°C 66°C 69°C.

CPU E core core average temperature: 55°C 55°C 55°C 55°C 55°C 55°C 55°C 55°C 55°C.

Furmark was used for a graphics card copy machine test with a full load for 10 minutes at a maximum temperature of 62°C.

Finish.