No one can do without the toilet in daily life, and it is used many times a day, so will you use the toilet correctly? I believe that many friends will feel ridiculous when they hear this question, thinking that who will not use the toilet? In fact, it does not mean that it will not be used, but the method used is not right, there is a water tank behind our toilet, and there are two buttons on the water tank, one large and one small, when we need to flush, it is through these two buttons to drain the water and flush the stains off. But do you know that these two buttons are also exquisite to use, so let's talk to you about some tips for using the toilet, let's find out together!
First of all, let's understand the two buttons on the water tank, these two buttons are not the same size, they are both a large and a small design. Maybe many friends press two buttons at the same time after going to the toilet, and they also think that designing one button is enough, there is no need to design two buttons, in fact, these two buttons are designed to save water. The big button represents a full drainage function, which means that when we press the big button, we can drain all the water in the tank at once, but if we just press the small button alone, we can only discharge half of the water in the tank. When we get on the small or just some fine impurities, we can choose to press the small button separately to drain half of the water in the tank, and the stain can be washed off, otherwise you need to press the large button.
But if we press both buttons at the same time, it will not only drain the water in the tank at the same time, but its momentum will also increase. When encountering some stains that are difficult to rinse, we can choose to press and hold both buttons at the same time, so that the stains can be rinsed clean. When we usually use it, we can choose the button according to the size of the stain, which can not only flush the stain off, but also save water.
When the toilet at home is used for a long time, due to frequent pressing, it will cause the two buttons to freeze. There may even be buttons that cannot rebound after being pressed. My toilet has had such a problem before, after pressing the button, it did not spring up, and then the inside of the tank has been in a state of water, if it is not found in time, it will inadvertently waste a lot of water. Later, I learned that it turned out that the button was soaked in water for a long time, which produced scale, and then these scales got stuck in the middle of the button, which led to such a situation. In the case of such a problem, the solution is also very simple, we only need to open the lid of the tank, and then squeeze a little shampoo on the two buttons, and then we press these two buttons a few times so that the shampoo can penetrate into the middle of the two buttons.
After pressing a few times, we will find that the button becomes very smooth and does not stutter at all. This is because shampoo cleans limescale from button crevices, and the shampoo itself has a lubricating effect. This will make the two buttons smooth again, and there will be no more stuttering.
In addition, our toilet flushes at least half of the water in the tank every time it flushes, many people feel wasteful, in fact, we can also use a plastic bottle to save water. The method is very simple, we first prepare a beverage bottle, the general beverage bottle has a capacity of 500 ml, we then fill the bottle with a bottle of water, and then directly put it in the water of the water tank. Because the toilet tank has a certain water level, when the water reaches a certain level, it will stop the water. And we put a bottle of water in the water tank, which is equivalent to 500ml less water in the water tank. Each charge of water saves 500ml, and a lot of water can be saved after a long time of accumulation. If today's article is helpful to you, then click a follow, like it, thank you for your support.