At present, in 2022, the pace of people's lives has changed from the past, and the requirements for network quality have also increased exponentially. I vaguely remember that more than a decade ago, people were willing to slowly wait for a 1GB movie to be downloaded at a speed of 200KB/s. Nowadays, as long as the network speed does not reach its peak bandwidth, or there is a slight delay in the game, it is stuck, everyone will criticize the network. But in the end, everyone scolded and scolded, and they had to obediently go back to find the reason, what was wrong.
From the perspective of the general environment, people's network equipment and technology development is very fast, the popularity of 5G WiFi can be described as a thousand miles a day, gigabit broadband is gradually popularized to the homes of ordinary people. However, everyone's attention to the networking environment is not as important as the frequent replacement of mobile phones and computers. Gigabits into the household, the source has been upgraded, but the old line buried in the home, and the 100 trillion route that can only meet the needs of 5 people, have become the network bottleneck in many people's homes. That change of line is bound to tear down the wall and dig the line, is it really so troublesome? Not necessarily, it is better to take a look at this LEADING MX5500 series route and then decide.
The reason why it can solve the dilemma of upgrading the network environment of the family and re-digging the line is due to its mature iMesh one-click networking solution.
One element of the impact group mesh experience is the rate, the MX5500 series adopts the mainstream dual-band design, and both the 2.4G and 5G bands support Wi-Fi 6 transmission protocols. Among them, the 5GHz band transceiver antenna is 4x4, up to 160MHz bandwidth, providing a transmission rate of up to 4804Mbps, while the 2.4GHz band transceiver antenna is 2x2, up to 40MHz bandwidth, providing a transmission rate of 574Mbps, a total of 6 concurrent independent channels jointly provide up to 5400Mbps total network bandwidth.
As a dual-band WiFi 6 router up to 5400M, a single MX5500 device (MX5501) can access 30 devices without network congestion in a home environment. Home mobile phones, computers, game consoles, TVs, many devices networking caton can really consider changing a better router.
Another factor that affects the mesh experience is the stability of the connection, when it comes to the mesh of the leader, friends who have played the routing should have heard of the elite mesh technology of the leader, which is a very good mesh wi-Fi technology of the leader, and this technology is also applied to the MX5500 series of the leader. First of all, the MX5500 series still supports Velomp's "auto-repair" feature, when one of the devices in mesh has a problem of offline, it will automatically find the nearest device and automatically complete the reconnection network to ensure that subsequent devices will not be affected by the disconnection.
In addition, Velop also supports the automatic scanning channel function to find the Wi-Fi channel with the fewest devices in the current network environment for networking. Users do not need too much operation, you can use it for networking simply and stably, and obtain high connection stability.
When it comes to stability, some people may be worried about using wireless devices to switch between two APs, and whether there will be a network flash. You can also rest assured that in the case of multi-device mesh, the Wi-Fi SSID is shared in the same, so between different nodes, the device will automatically assign the device with a stronger signal to connect first, and the MX5500 series is equipped with seamless roaming technology, the switch between nodes is seamless, even if you are playing games, there will be no stuttering or disconnection.
Of course, if you still can't believe its wireless mesh, you can also form Mixed Mesh or Wired Mesh system through a wired connection, which is also one of the characteristics of Velomp, which can be flexibly meshed according to the user's network environment, for example, in a two-story villa, the first and second floors use Wi-Fi wireless connection, and the different rooms on the second floor use wired connections, if your villa is larger, you can also buy more MX5500 unlimited nodes. But I'm thinking, since the network in your home is facing the situation of digging lines, the two routing group wired meshes don't seem to solve any problems...
The characteristics of the MX5500 series of routes, so that it can solve the current problems in many families that are difficult to solve, just access the main route next to the household light cat, and then use another route to form Mesh in the range of the network at home, you can get the network coverage of the whole house without dead ends, and thanks to the technical blessing of WiFi 6, many people's concerns about network speed and latency problems have also disappeared, and you can get a low-latency and high-speed network experience similar to the wired network without disassembling the wall. If you are still worried about the upgrade of the network at home, take a look at the MX5500 series, you may have gained.