Among amateur table tennis enthusiasts, there are two most popular ways of playing, one is anti-glue playing, and the other is long glue playing. Putting aside the advanced nature of the playing method, anti-glue and long glue are widely used by amateurs. Generally speaking, there are three situations in which amateurs choose long glue: one is to achieve good results in the game; the other is the advice of friends around; the third is to try to experience it. For amateur table tennis enthusiasts should not use long glue, you can analyze the advantages and disadvantages of long glue play:
First, the advantages of playing long glue
Long glue technology is more difficult to master than anti-glue technology, so there are relatively few people playing long glue. Therefore, the anti-glue players are not very adapted to the long glue players, which makes the long glue players' competition performance better than the anti-glue players of the same level.
The long glue has the characteristics of anti-rotation and borrowing power, which can effectively inhibit the continuous attack of the opponent. For example, the front-facing arc circle ball pulled by the opponent, the long rubber block back into a downward spiral ball, can not continuously use the front arc circle ball attack. Moreover, the long glue player has the possibility of crossing the level to challenge the anti-glue player. Even if it is a very high-level anti-glue player, if you do not master the method of playing long glue, you will lose to the low-level long glue player.
Second, the disadvantages of playing long glue
1. Most of the amateur players who play long glue are the long glue that is replaced after the first use of anti-glue, and there is a general inertial thinking of anti-glue, and the performance and technology of long glue are not in place.
2. The long glue cannot be practiced like the anti-glue player, it is difficult to find a suitable opponent to practice, and the continuity of the technical action is difficult to ensure. The long rubber players lack professional coaching guidance, do not have a formed system training mode, and can only rely on their own experience and thinking.
Third, the basic technology of long glue
1. Horizontal plate long glue backhand dial
The technical action of the horizontal plate long rubber backhand stroke is similar to the anti-glue, it should be noted that when hitting the ball, the racket type should be erected, and the middle and upper part of the shot should be forced forward or right forward. Because the long glue is easy to slip, when hitting the ball, pay attention to adjusting the racket type according to the rotation of the incoming ball.
2. Long glue backhand bump
The long rubber backhand bump is similar to the straight backhand side cutting or side squeezing action, and the hitting action is from top to bottom or from right to left. The use of the ball on the spin and the ball without turning is better. When practicing, according to the judgment of the rotation intensity, adjust the downward pressure angle of the beat type in time.
3. Long rubber backhand arch
The long rubber backhand arch is similar to the combination of anti-glue straight plate rubbing and pushing, that is, the force of pushing on the basis of rubbing. Generally hit the middle and lower parts of the ball. The arch works best for the downward spiral ball and is a more threatening offensive means of long glue.