Follow | Top
The fresh play content you bring every day will never make you regret it
Model Maker | Tank sails away
Kit | GUNDAM ARTIFACT Zagu 3
tag | GK production, painting, masterpieces, submissions
This time it was two artifact second-bullet Zaku 3.
1. Regarding the sanding of parts, 800 mesh sandpaper and 3m blue sponge sandpaper are mainly used. Due to the small scale of the model, in the sanding process, it is also necessary to be patient to prevent some smaller planes from being skewed; for the larger gaps in the torso part, the use of slit glue and toothpaste to repair the soil was treated.
2. Regarding the painting and coloring, the main color is sprayed with oil-based paint, and the combination of covering tape and masking liquid is mainly used for processing when color separation, and finally the individual details are supplemented by enamel paint. When using the masking liquid, be sure to apply it several times and try to apply it as thickly as possible, otherwise it will greatly increase the workload when tearing the cover, which is quite maddening. The water sticker is mainly based on the special water sticker for the Gundam gacha purchased online, and after the sticker is finished, the varnish protection is used to infiltrate the line, and finally the extinction is completed.
3. Thanks to the better quality of the model, in the absence of engraving processing, it can still get better detail performance after seeping the line. If you can deepen the line of the model at the element group stage, you can get better results.
Not done well, for reference only, thank you!