Among amateur golfers, many of them are playing with glue. At present, the world table tennis, equipment is reforming, rules are reforming, and granular rubber seems to be ushering in another spring.
Like Sweden's Fark (masako), Japan's Ito Mimachi (raw glue), etc., are currently the fierce opponents of national table tennis, and each competition will be put on the list of major opponents.
There are two ways to paste the rubber and the bottom plate of the table tennis: the smooth side of the rubber is outward, and the particles are facing inward, so this is the anti-glue; on the contrary, the smooth side is outward, and the particles are inward, which is the particle glue.
The granular glue method is also distinguished according to the relationship between the height of a single particle and the size of the diameter. Among them, the height of a single particle is equal to the diameter, that is, the positive glue; if the height of a single particle is greater than the diameter, it is a long glue; if the height of a single particle is less than the diameter, it is raw glue.
As we all know, people like Liu Guoliang, Zhuang Zedong, Jiang Jialiang, Li Furong, Xie Saike and Gao Jun are all super masters of straight board and glue. This article, let's talk to you about positive glue.
01
Speed, strength advantage, slightly worse rotation
As already mentioned, the anti-glue particles face down, and the positive glue particles face up. This pasting method leads to a friction sensation of anti-glue, which is much stronger than that of positive glue; however, positive glue is much stronger than anti-glue in terms of strength and speed.
02
The way in which the anti-glue and positive glue are powered
The advantage of anti-glue is friction and rotation, so it is basically based on the arc circle combined with the fast attack method; and the advantage of the positive glue is the speed and strength, to highlight these two points to make up for the lack of rotation, so the playing method of the positive glue is mainly based on the combination of fast attack and arc.
Under the positive glue playing system, it is mainly through speed and strength to suppress the opponent's rotation, friction is only auxiliary, which is a more risky way of playing, once the attack begins, it cannot be conservative until the end of the round.
The anti-glue and positive glue batting action is also different, the anti-glue friction is the main force to avoid the ball core, and the positive glue is mainly hit, try not to rub when the force is exerted, so that the force is solid through the ball core.
03
Positive glue can pull the arc circle
As mentioned earlier, the core of the positive glue is to hit the main, and exert its advantages in speed and strength. But in actual games, not all the balls can be played directly, but first look for and create opportunities.
Then, at this time, you need a plate to pull the ball, first pull and then play, this is a typical Liu Guoliang playing style, at this time you can use positive glue to try to pull the arc circle.
At the same time, because the positive glue is also a kind of particle after all, there are sometimes anti-rotation (long glue is more common), which is also a point that needs to be paid attention to and used.
The above is some of my sharing of positive glue, and finally make a summary:
Positive glue is a kind of granular rubber, compared to anti-glue, its advantage lies in its speed and strength, and the deficiency lies in rotation, so positive glue pays more attention to the fast attack combined arc.
In practice, what the player needs to learn is to suppress the opponent's rotation through speed and strength, and the force must be through the ball core to penetrate the ball.
Of course, in the process of actual combat, it is often necessary to pull the ball up on the first board, create opportunities and then play!
What else do you know about positive glue? Welcome to communicate in the comments section~