Although the popularization of WiFi6 technology has not been long ago, many flagship mobile phones have adopted WiFi6 enhanced versions to further improve WiFi performance. If you want to experience a better network experience, you must also cooperate with routers that support WiFi6 Plus. So if we want to upgrade the router at home now, we may as well choose this MX5502 router that supports WiFi6 Enhanced Edition in one step. It not only has a significant increase in network speed, but also can accommodate more terminal equipment. Importantly, it also supports Mesh networking, which can achieve gigabit network coverage of the whole house.
What are the main benefits of WiFi6 Plus?
The main advantage of WiFi6 Enhanced Edition is the use of 4K QAM encoding technology and 160Mhz bandwidth. The first thing to know is that the standard for ordinary WiFi6 is 1024 QAM, and the WiFi6 Enhanced version is as high as 4096 QAM, and the higher the value of QAM, the greater the throughput of the data. Therefore, when the Lingshi MX5502 router is used with terminal devices that support 4K QAM, the WiFi rate can be increased by about 20%.
In addition, wiFi6 plus version of the bandwidth up to 160Mhz, can provide data with a wider road, reduce congestion, and further increase network throughput. Coupled with the fact that the MX5502 has 6 concurrent data streams, its dual-frequency rate is as high as 5400Mbps, which are 2.4G 40Mhz 2x2 574Mbps and 5G 160Mhz 4x4 4804Mbps, and the total speed is 3 times that of ordinary WiFi 6 1800Mbp s routers.
What are the benefits in practical application scenarios?
In addition to enjoying higher internet speeds, basically everyone now has several electronic devices, as well as smart TVs, smart homes and other devices that need to be connected to the Internet, while routers can access devices are limited. However, thanks to six concurrent data streams and a bandwidth of 160Mhz, the MX5502 router can access about 60 terminal devices at the same time to meet the network requirements of multi-device connection.
In addition, ordinary routers are often prone to serious network delays when they are connected to many devices. Multiple concurrent data streams and higher bandwidth can avoid network congestion and effectively reduce latency. Therefore, the MX5502 router can still provide a high-speed and stable network for each terminal pole device in the face of multi-device connections and even other data-intensive operations such as 4K video streaming.
Higher signal strength to take advantage of speed
While WiFi6 Plus' 4K QAM encoding technology delivers higher theoretical speeds, it also means that higher signal strength is required to actually reach this height. The MX5502 router has four high-gain omnidirectional antennas and independent wifi power amplifiers built in to greatly enhance its signal strength and coverage. Its single coverage area is 250 square meters, and two can reach 500 square meters. Even in large-scale houses, it can keep every corner,
Mesh networking, network coverage without dead ends
In addition to the wide coverage area of the single body, the MX5502 router also supports mesh networking. Wired or wireless networking with routers that support intelligent Mesh technology, as well as bridged (AP) mode networking, is very flexible. In the multi-floor apartment, if the two nodes of the MX5502 router cannot achieve full house coverage, you can also add unlimited nodes to achieve true whole house gigabit network coverage.
This not only avoids the lack of WiFi signal in bedrooms, balconies, etc., but also provides network support for smart homes distributed in different locations. In addition, thanks to Linksys iMesh active roaming technology and 802.11K/V passive seamless roaming technology, it can achieve seamless switching, avoiding disconnection, stuttering, stuttering and other conditions when playing games or watching live broadcasts.
Therefore, the Lingshi MX5502 router not only has the WiFi6 Enhanced Edition blessing, which enables it to bring high-speed ownership experience and support access to many devices, and multi-device connections do not stutter. In addition, mesh networking can also be carried out, so that every corner of the house can have a high-intensity signal, with seamless roaming technology, enjoy a silky and seamless network experience.