The last eliminated notebook is 10 years ago, remember that the first upgrade to use SATA SSD is already a qualitative leap, but the technology is always in rapid progress, and then SATA SSD has been invisible. Later in 16 years into the Shadow Elf II, the original comes with a 128G capacity M.2 interface PCIe protocol SSD + 1T MECHANICAL HARD DISK configuration, fortunately with M.2 port, try to upgrade an NVMe M.2 solid state. This time upgrade a larger capacity of 1T solid state, so that two 1T hard disks, can continue to work for him for three or five years.
Original 128G solid state
However, the replacement and upgrading of solid state cannot be said to be 100% successful, and occasionally it will encounter a rollover. This time the use of the domestic brand aigo P2000 1TB, this is also the lowest cost of the current one, double eleven Jingdong subsidies to hand nearly 399 yuan, this price is understood to be an absolute loss of money. It uses high-quality TLC particles with a reading speed of up to 2100MB/S, which is four times higher than the original speed of about 500MB/S.
aigo has always adhered to the concept of "creating good things for the people", and its business covers intelligent storage, interconnected terminals, intelligent audio, digital recording, intelligent security, smart energy, intelligent hardware, smart home and other fields. In the field of storage, it has been deeply cultivated for 21 years, and naturally there is a guarantee in quality, and aigo P2000 1TB has also made a fifteen-day replacement, five-year warranty or 512TBW commitment, which must be assured.
The aigo P2000 package is relatively simple, but the box seems to have been redesigned, looking more personal, and in the middle is a group of letters pattern similar to a smiley face. Inside, there is an instruction manual warranty card, and the SSD body is stuck in a plastic blister shell, which can effectively prevent damage during transportation.
This SSD uses the standard M.2 2280 size, which is also a specification of the current mainstream solid state, which can be easily installed on desktops and laptops, using a PCLe3.0 X4 interface, supporting the NVMe 1.3 standard. On the front is an orange + white sticker, you can see the product specifications and bar code information, etc.
This hard drive is a single-sided mounting particle design, which will be thinner and easier to install overall.
The aigo P2000 uses TLC flash memory particles and uses the SM2263XT master, which can also be seen in many other brands of NVMe SSDs. NVMe masters are DRAM-less no external cache scheme, but they all support HMB (that is, host memory buffers), HMB supportSD master to call the host idle memory resources, borrow host memory to achieve FTL mapping table access, to improve the performance of SSD.
Install solid state, remember to see if your computer supports M.2 NVMe, because there are also many computers that only support M.2 SATA, although it can also be plugged in, but it may not be lit, so when purchasing, be sure to see the interface of the machine.
Installation is still relatively convenient, but when installing the SSD, remember to unplug the battery. In addition, the system disk is installed on the solid state, so this time you need to copy the original system to the U disk, replace it with a new hard disk, and then transfer it back.
After the installation is completed, look at the information of the hard disk, you can see that aigo P2000 supports the NVMe 1.3 standard, the current system is operating normally, and the boot speed has been significantly improved, the original every time the boot needs to wait, now after updating the solid state, it is almost a second to open.
Has been worried about the old computer compatibility and other issues, whether the speed will be greatly reduced, with the solid-state dedicated test software AS SSD Benchmark first do a test, the final measured read speed of 1889.80MB/s, write speed of 1540.51MB/s, and the official nominal speed is not very different. It seems that the parameters of this solid state have no false standards and can indeed be achieved.
In order to make a comparison and avoid the error of the software, and then use the CrystalDiskMark to do a speed comparison, this time the read speed is 1609.97MB/s, the write speed is 1355.89MB/s, considering the system itself, this speed has been very satisfied.
With HD Tune Pro to do a benchmark test, the overall is still relatively stable, although there is no cache chip, but the hard disk has a cache capacity of nearly 160GB, the cache capacity after the use of the speed is about two or three hundred, or very good. For the average user, it should be rare to transfer hundreds of gigabytes of files at a time, and there are very few cases where the cache can be used up, which is actually not necessary.
Of course, the software running score is not the only reference, the actual copy to try, 1.6G of a file, almost too late to take a screenshot, less than two seconds to copy the completion, this speed, think about the original strip, regret did not upgrade earlier, even if there are 30G, 50G super large files, it is less than 1 minute thing.
After updating the new solid hard disk, in the future, any PS, AE, PR software can be on, the original notebook can also run, but that speed, let me have to use Meitu Xiuxiu to solve, and now finally can return. After updating NVMe M.2, it can be said that "old wood every spring" has started a new journey.
aigo NVMe solid state hard P2000 1TB is really super high in terms of cost performance, especially suitable for old notebook upgrades like LEO this time, the cost is less than 400 yuan, but the performance has been several times improved. This double eleven to get friends, really worth it! Measured data read 1889.80MB/s, write 1540.51MB/s speed, such a price and such data, almost can be the end of the second peer.