显示效果
跨级别区间套演示
板块演示
个股演示
期货演示
公式安装方法：
1、打开通达信股票行情软件
2、按Ctrl+F调出公式管理器
3、点击“新建”，将下面的源代码复制上即可。注：画线方式记住选“主力叠加”
4、回到K线图界面，键入“CLGS”即可显示
公式代码如下：
{三角形中枢}
时间:=4;
A:=H=HHV(H,时间*5) AND HHV(H,时间*5)>REF(HHV(H,时间*5),1);
B:=L=LLV(L,时间*5) AND LLV(L,时间*5)<REF(LLV(L,时间*5),1);
CC1:DRAWLINE(A,H,B,L,0);
CC2:DRAWLINE(B,L,A,H,0);
N:=(0,1,1);
{缠论高低点}
局部低点预选A:=BACKSET(LLV(L,5)<REF(LLV(L,4),1),4);
局部低点预选B:=BACKSET(局部低点预选A=0 AND REF(局部低点预选A,1)=1,2);
局部低点预选C:=IF(局部低点预选B=1 AND REF(局部低点预选B,1)=0,-1,0);
局部高点预选A:=BACKSET(HHV(H,5)>REF(HHV(H,4),1),4);
局部高点预选B:=BACKSET(局部高点预选A=0 AND REF(局部高点预选A,1)=1,2);
局部高点预选C:=IF(局部高点预选B=1 AND REF(局部高点预选B,1)=0,1,0);
AB1:='显示不全，请到';
缺口判断:=IF(L>REF(H,1),1,IF(H<REF(L,1),-1,0));
距前高天:=BARSLAST(局部高点预选C=1);
距前低天:=BARSLAST(局部低点预选C=-1);
小值周期:=LOWRANGE(L);
大值周期:=TOPRANGE(H);
AB2:=STRCAT(AB1,'网站');
低保留AA:=IF(局部低点预选C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留AB:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判断,距前高天)=-1 OR LLV(L,距前低天+2)<REF(LLV(L,距前低天+1),1)),-1,0);
低保留S:=IF((低保留AA=-1 OR 低保留AB=-1) AND L<REF(H,距前高天+1),-1,0);
预判:=IF((距前低天<4 AND HHV(缺口判断,距前低天)!=1) OR REF(低保留S,距前低天)=0,1,0);
判断:=IF(局部高点预选C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND 预判=1 AND 大值周期>REF(小值周期,距前低天+1) AND 大值周期>REF(小值周期,距前低天) AND 大值周期>REF(大值周期,距前高天),1,0);
高保留A:=IF(局部高点预选C=1 AND REF(距前低天,1)>REF(距前高天,1) AND HHV(H,距前低天+1)>REF(HHV(H,距前低天+1),1),1,0);
高保留B:=IF(局部高点预选C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND REF(低保留S,距前低天)=-1 AND (距前低天>=4 OR HHV(缺口判断,距前低天)=1),1,0);
高保留:=IF((高保留A=1 OR 高保留B=1 OR 判断=1) AND H>REF(L,距前低天+1),1,0);
预判A:=IF((距前高天<4 AND HHV(缺口判断,距前高天)!=1) OR REF(高保留,距前高天)=0,1,0);
判断A:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND 预判A=1 AND 小值周期>REF(大值周期,距前高天+1) AND 小值周期>REF(大值周期,距前高天) AND 小值周期>REF(小值周期,距前低天),-1,0);
低保留A:=IF(局部低点预选C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留B:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判断,距前高天)=-1 OR 判断A=-1),-1,0);
低保留:=IF((低保留A=-1 OR 低保留B=-1) AND L<REF(H,距前高天+1),-1,0);
距前高天A:=BARSLAST(高保留=1);
距前低天A:=BARSLAST(低保留=-1);
AB3:=STRCAT(AB2,' RO');
预判X:=IF((距前低天A<4 AND HHV(缺口判断,距前低天A)!=1) OR REF(低保留,距前低天A)=0,1,0);
判断X:=IF(局部高点预选C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND 预判X=1 AND 大值周期>REF(小值周期,距前低天A+1) AND 大值周期>REF(小值周期,距前低天A) AND 大值周期>REF(大值周期,距前高天A),1,0);
高保留XA:=IF(局部高点预选C=1 AND REF(距前低天A,1)>REF(距前高天A,1) AND HHV(H,距前低天A+1)>REF(HHV(H,距前低天A+1),1),1,0);
高保留XB:=IF(局部高点预选C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND REF(低保留,距前低天A)=-1 AND (距前低天A>=4 OR HHV(缺口判断,距前低天A)=1),1,0);
高保留X:=IF((高保留XA=1 OR 高保留XB=1 OR 判断X=1) AND H>REF(L,距前低天A+1),1,0);
预判XA:=IF((距前高天A<4 AND HHV(缺口判断,距前高天A)!=1) OR REF(高保留XA,距前高天A)=0,1,0);
判断XA:=IF(局部低点预选C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND 预判XA=1 AND 小值周期>REF(大值周期,距前高天A+1) AND 小值周期>REF(大值周期,距前高天A) AND 小值周期>REF(小值周期,距前低天A),-1,0);
低保留XA:=IF(局部低点预选C=-1 AND REF(距前高天A,1)>REF(距前低天A,1) AND LLV(L,距前高天A+1)<REF(LLV(L,距前高天A+1),1),-1,0);
低保留XB:=IF(局部低点预选C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND (距前高天A>=4 OR LLV(缺口判断,距前高天A)=-1 OR 判断XA=-1),-1,0);
低保留X:=IF((低保留XA=-1 OR 低保留XB=-1) AND L<REF(H,距前高天A+1),-1,0);
距前高天YA:=BARSLAST(高保留X=1);
距前低天YA:=BARSLAST(低保留X=-1);
AB4:=STRCAT(AB3,'EE.');
预判YX:=IF((距前低天YA<4 AND HHV(缺口判断,距前低天YA)!=1) OR REF(低保留X,距前低天YA)=0,1,0);
判断YX:=IF(局部高点预选C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND 预判YX=1 AND 大值周期>REF(小值周期,距前低天YA+1) AND 大值周期>REF(小值周期,距前低天YA) AND 大值周期>REF(大值周期,距前高天YA),1,0);
高保留YXA:=IF(局部高点预选C=1 AND REF(距前低天YA,1)>REF(距前高天YA,1) AND HHV(H,距前低天YA+1)>REF(HHV(H,距前低天YA+1),1),1,0);
高保留YXB:=IF(局部高点预选C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND REF(低保留X,距前低天YA)=-1 AND (距前低天YA>=4 OR HHV(缺口判断,距前低天YA)=1),1,0);
高保留YX:=IF((高保留YXA=1 OR 高保留YXB=1 OR 判断YX=1) AND H>REF(L,距前低天YA+1),1,0);
预判YXA:=IF((距前高天YA<4 AND HHV(缺口判断,距前高天YA)!=1) OR REF(高保留YXA,距前高天YA)=0,1,0);
判断YXA:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND 预判YXA=1 AND 小值周期>REF(大值周期,距前高天YA+1) AND 小值周期>REF(大值周期,距前高天YA) AND 小值周期>REF(小值周期,距前低天YA),-1,0);
AB5:=STRCAT(AB4,'CN 直接');
低保留YXA:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)>REF(距前低天YA,1) AND LLV(L,距前高天YA+1)<REF(LLV(L,距前高天YA+1),1),-1,0);
低保留YXB:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND (距前高天YA>=4 OR LLV(缺口判断,距前高天YA)=-1 OR 判断YXA=-1),-1,0);
低保留YX:=IF((低保留YXA=-1 OR 低保留YXB=-1) AND L<REF(H,距前高天YA+1),-1,0);
AAAD:=IF(高保留YX=1 AND 低保留YX=-1 AND H>REF(H,REF(距前高天YA,1)+2),1,IF(高保留YX=1 AND 低保留YX=-1 AND L<REF(L,REF(距前低天YA,1)+2),-1,0));
极点保留:=IF(AAAD=0,高保留YX+低保留YX,AAAD);
AB6:=STRCAT(AB5,'下');
局部极点:IF(极点保留=-1,L,IF(极点保留=1,H,DRAWNULL)),CIRCLEDOT,COLORLIMAGENTA;
C1:DRAWLINE(极点保留=-1,局部极点,极点保留=1,局部极点,0),COLORLIGRAY;
C2:DRAWLINE(极点保留=1,局部极点,极点保留=-1,局部极点,0),COLORLIGRAY;
极顶:=IF(N=1,C2=C1 AND 局部高点预选A AND 极点保留=1,DRAWNULL);
极底:=IF(N=1,C2=C1 AND 局部低点预选A AND 极点保留=-1,DRAWNULL);
AB7:=STRCAT(AB6,'载缠');
A1:=BARSLAST(极顶);B1:=CURRBARSCOUNT=CONST(A1)+1;D1:=BARSLAST(B1);高1:=CONST(REF(H,D1));
A2:=REF(A1,A1+1)+A1+1;B2:=CURRBARSCOUNT=CONST(A2)+1;D2:=BARSLAST(B2);高2:=CONST(REF(H,D2));
A3:=REF(A2,A1+1)+A1+1;B3:=CURRBARSCOUNT=CONST(A3)+1;D3:=BARSLAST(B3);高3:=CONST(REF(H,D3));
DA1:=BARSLAST(极底);DB1:=CURRBARSCOUNT=CONST(DA1)+1;DD1:=BARSLAST(DB1);低1:=CONST(REF(L,DD1));
DA2:=REF(DA1,DA1+1)+DA1+1;DB2:=CURRBARSCOUNT=CONST(DA2)+1;DD2:=BARSLAST(DB2);低2:=CONST(REF(L,DD2));
DA3:=REF(DA2,DA1+1)+DA1+1;DB3:=CURRBARSCOUNT=CONST(DA3)+1;DD3:=BARSLAST(DB3);低3:=CONST(REF(L,DD3));
三角型放大A:=低1<低2 AND 高2>高1 AND DA2>A1 AND A1>DA1 AND A2>DA2 AND CONST(C)>低2;
AB8:=STRCAT(AB7,'公');
中枢A1:=IF(三角型放大A AND CONST(C)<高1,DB2,DRAWNULL);
STICKLINE(中枢A1,CONST(C),低2,0,0),COLORLIMAGENTA;
中枢A2:=IF(三角型放大A AND CONST(C)<高1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢A2,CONST(C),低2,0,0),COLORLIMAGENTA;
DRAWLINE(中枢A1=1,CONST(C),中枢A2=1,CONST(C),0),DOTLINE,COLORLIMAGENTA;
DRAWLINE(中枢A1=1,低2,中枢A2=1,低2,0),COLORLIMAGENTA;
{成立}
中枢AC1:=IF(三角型放大A AND CONST(C)>=高1,DB2,DRAWNULL);
STICKLINE(中枢AC1,高1,低1,0,0),COLORLIMAGENTA;
中枢AC2:=IF(三角型放大A AND CONST(C)>=高1,ISLASTBAR,DRAWNULL);
AB:=STRCAT(AB8,'式');
STICKLINE(中枢AC2,高1,低1,0,0),COLORLIMAGENTA;
DRAWLINE(中枢AC1=1,高1,中枢AC2=1,高1,0),COLORLIMAGENTA;
DRAWLINE(中枢AC1=1,低1,中枢AC2=1,低1,0),COLORLIMAGENTA;
三角型放大B:=低1>低2 AND 高1>高2 AND DA1>A1 AND A2>DA1 AND DA2>A2 AND CONST(C)<高2;
中枢B1:=IF(三角型放大B AND CONST(C)>低1,B2,DRAWNULL);
STICKLINE(中枢B1,CONST(C),高2,0,0),COLORGREEN;
中枢B2:=IF(三角型放大B AND CONST(C)>低1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢B2,CONST(C),高2,0,0),COLORGREEN;
DRAWLINE(中枢B1=1,高2,中枢B2=1,高2,0),COLORGREEN;
DRAWLINE(中枢B1=1,CONST(C),中枢B2=1,CONST(C),0),DOTLINE,COLORGREEN;
{成立}
中枢BC1:=IF(三角型放大B AND CONST(C)<=低1,B2,DRAWNULL);
STICKLINE(中枢BC1,高2,低1,0,0),COLORGREEN;
中枢BC2:=IF(三角型放大B AND CONST(C)<=低1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢BC2,高2,低1,0,0),COLORGREEN;
DRAWLINE(中枢BC1=1,高2,中枢BC2=1,高2,0),COLORGREEN;
DRAWLINE(中枢BC1=1,低1,中枢BC2=1,低1,0),COLORGREEN;
三角型收敛A:=低1>低2 AND 高2>高1 AND DA2>A1 AND A1>DA1 AND A2>DA2 AND CONST(C)>低1;
中枢C1:=IF(三角型收敛A AND CONST(C)<高1,DB2,DRAWNULL);
STICKLINE(中枢C1,CONST(C),低1,0,0),COLORYELLOW;
中枢C2:=IF(三角型收敛A AND CONST(C)<高1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢C2,CONST(C),低1,0,0),COLORYELLOW;
DRAWTEXT_FIX(1,0.5,0.5,0,AB) COLOR0000FF;
DRAWLINE(中枢C1=1,CONST(C),中枢C2=1,CONST(C),0),DOTLINE,COLORYELLOW;
DRAWLINE(中枢C1=1,低1,中枢C2=1,低1,0),COLORYELLOW;
{成立}
中枢CC1:=IF(三角型收敛A AND CONST(C)>=高1,DB2,DRAWNULL);
STICKLINE(中枢CC1,高1,低1,0,0),COLORYELLOW;
中枢CC2:=IF(三角型收敛A AND CONST(C)>=高1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢CC2,高1,低1,0,0),COLORYELLOW;
DRAWLINE(中枢CC1=1,高1,中枢CC2=1,高1,0),COLORYELLOW;
DRAWLINE(中枢CC1=1,低1,中枢CC2=1,低1,0),COLORYELLOW;
三角型收敛B:=低1>低2 AND 高1<高2 AND DA1>A1 AND A2>DA1 AND DA2>A2 AND CONST(C)<高1;
中枢D1:=IF(三角型收敛B AND CONST(C)>低1,B2,DRAWNULL);
STICKLINE(中枢D1,CONST(C),高1,0,0),COLORLICYAN;
中枢D2:=IF(三角型收敛B AND CONST(C)>低1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢D2,CONST(C),高1,0,0),COLORLICYAN;
DRAWLINE(中枢D1=1,高1,中枢D2=1,高1,0),COLORLICYAN;
DRAWLINE(中枢D1=1,CONST(C),中枢D2=1,CONST(C),0),DOTLINE,COLORLICYAN;
{成立}
中枢DC1:=IF(三角型收敛B AND CONST(C)<=低1,B2,DRAWNULL);
STICKLINE(中枢DC1,高1,低1,0,0),COLORLICYAN;
中枢DC2:=IF(三角型收敛B AND CONST(C)<=低1,ISLASTBAR,DRAWNULL);
STICKLINE(中枢DC2,高1,低1,0,0),COLORLICYAN;
DRAWLINE(中枢DC1=1,高1,中枢DC2=1,高1,0),COLORLICYAN;
DRAWLINE(中枢DC1=1,低1,中枢DC2=1,低1,0),COLORLICYAN;