复合数据类型，英文词频统计

作业来源于：https://edu.cnblogs.com/campus/gzcc/GZCC-16SE2/homework/2696

一、列表，元组，字典，集合分别如何增删改查及遍历?

1、列表

list=['Jack','Lucy','Mary']
list.append('Pony')
print("末尾增加元素 ：{}".format(list))

list.insert(1,"Lili")
print("指定位置增加元素 ：{}".format(list))

list=['Jack','Lucy','Mary']
list.remove('Jack')
print("删除元素 ：{}".format(list))

list=['Jack','Lucy','Mary']
list.pop(0)
print("删除元素 ：{}".format(list))

list=['Jack','Lucy','Mary']
list[0]='a'
print("修改元素 ：{}".format(list))

list=['Jack','Lucy','Mary']
print("查找元素 ：{}".format(list[0]))

print("遍历列表")
for l in list:
    print("{} :{}".format(list.index(l),l))

           

2、元组

tup=('Jack','Lucy',0)
tup2=('Lili',)
tup3=tup+tup2
print("连接/增加元素 ：{}".format(tup3))

tup=('Jack','Lucy',0)
print("访问元素 ：tup[2]={},tup[0:1]={}".format(tup3[2],tup[0:2]))

tup=('Jack','Lucy',0)
print("删除元祖")
del tup

tup=('Jack','Lucy',0)
print("遍历元组：")
for t in tup:
    print(t)
           

3、字典

dict={'Jack':90,'Mary':80,'Tony':70}
dict["abc"]=100
print("增加abc：{}".format(dict))

dict={'Jack':90,'Mary':80,'Tony':70}
del dict['Jack']
print("删除Jack：{}".format(dict))

dict={'Jack':90,'Mary':80,'Tony':70}
dict.pop('Tony')
print("删除Tony：{}".format(dict))

dict={'Jack':90,'Mary':80,'Tony':70}
dict['Tony']=99
print("修改Tony的值：{}".format(dict))
dict['a']=dict.pop('Jack')
print("修改Tony的键：{}".format(dict))

dict={'Jack':90,'Mary':80,'Tony':70}
print("查找Mary的值：{}".format(dict.get('Mary')))

print("遍历字典：")
for d in dict:
    print("{} : {}".format(d,dict[d]))

           

4、集合

a=set('abcd')
a.add('z')
print("增加'z'：",a)
a.update({1,2})
print("增加 1,2：",a)

b=set(('a','b','c'))
b.remove('a')
print("删除a ：",b)

a=set('abcd')
a.discard('b')
print("删除a ：",a)

a=set('Jack')
a.pop()
print("pop删除 ：",a)

a=set('Jack')
a.clear()
print("清空集合 ：",a)

a=set('Jack')
b=set(('1','2'))
c=set.union(a,b)
print("集合的合集",c)

print("遍历集合：")
for s in c:
    print(s)
           

二、总结列表，元组，字典，集合的联系与区别。参考以下几个方面：括号、有序无序、可变不可变、重复不可重复、存储与查找方式。

列表：[]，有序，可变，可重复，按值存储，序列中的每个元素都分配一个索引，按索引号查找，元素可以是任意类型，可切片

元组：()，有序，与列表类似，但不可变，添加元素时用逗号隔开，按索引号查找，可切片

字典：{}，有序，可变容器模型，可存储任意类型对象，按key:value形式存储，但key不可重复，不可切片

集合：()，无序，不可重复，创建格式：set()或parame = {value01,value02,...}，每个元素可以是列表，元组，字典，不可切片

三、词频统计

要求：对文本进行预处理、去掉停用词并排序输出

源代码：

fo = open(r'G:\test\TheLittlePrince.txt', encoding='utf-8-sig')
theLittlePrinceTxt = fo.read()
txt = theLittlePrinceTxt.lower()
fo.close()
sep = '''  ,./:?/！ '\n  " [] ()  ～ '''
stops = {'by', 'his', 'their', 'again', 'off', 'where', 'now', 'up', 'this', 'before', 'which', 'after', 'a', 'then',
 "haven't", 'weren', 'll', 'down', 'or', 'no', "shan't", 'herself', 'in', 'some', 'such', "she's", 'does', 'nor', 
'just', "won't", 'them', 'further', 'how', 'am', 'mightn', 'it', 'too', 'ourselves', 'is', 'couldn', 'themselves', 
'should', 'ain', 'o', 'hadn', 'under', 'shan', 'him', "it's", 've', 'to', "don't", 'at', 'these', 'our', 'same', 'between', 
"you'd", 'isn', 'yourselves', 'until', 't', "mustn't", 'didn', 'few', 'each', 're', 'through', 'above', 'all', "you're", 
'been', 'hers', 'have', 'being', 'if', 'theirs', 'most', "doesn't", "hasn't", 'an', 'and', 'below', "couldn't", 'i', 'we', 
"hadn't", 'mustn', 'about', "shouldn't", 'there', 'her', 'y', 'here', 'was', "isn't", "needn't", 'were', 'haven', 'out', 
'ours', 'over', 'once', 'having', 'against', 'don', 'has', 'but', 'wouldn', 'with', 'other', 'doesn', 'itself', 'aren', 'when',
 'as', "wasn't", 'myself', "you'll", 'because', 'the', 'so', "didn't", 'are', 'for', "you've", 'd', 'hasn', 'wasn', 'on', 'he', 
's', 'of', 'they', 'needn', 'ma', 'while', 'than', 'from', "weren't", 'those', 'what', 'who', 'himself', "should've", 'will', 
'whom', 'more', "mightn't", 'do', 'its', 'why', 'only', 'that', 'during', 'not', 'had', 'own', 'm', 'me', 'very', 'doing', 'can',
 'be', 'my', 'both', 'into', "aren't", 'shouldn', 'won', 'yours', 'did', 'you', 'she', 'yourself', 'your', "wouldn't", 'any', "that'll"} 
 # 定义停用词

for s in sep:
    txt = txt.replace(s, " ")

allWord = txt.split()
mset = set(allWord)  # 去掉重复的单词，将文本转换为集合
mset = mset - stops  # 去除停用词
mdict = {}  # 定义字典，用于输出

for m in mset:
    mdict[m] = allWord.count(m)  # 统计每个字典的key的频数

mlist = list(mdict.items())  # 字典转换成列表
mlist.sort(key=lambda x: x[1], reverse=True)  # 列表排序
print(mlist[0:10])
print(mlist[10:20])  #输出top20

import pandas as pd  # 在默认目录生成csv文件
pd.DataFrame(data=mlist).to_csv('Little.csv', encoding='utf-8')

           

结果：

在线词云统计：