在RedHat上安装gcc，java 和 eclipse-rcp 1 Install gcc and automake: 2 java && mysql: 3 Get eclipse-rcp-3.2.1-19.el5.x86_64.rpm and eclipse-rcp-sdk-3.2.1-19.el5.x86_64.rpm

本文全是如何用rpm包在红帽子54上安装gcc，automake，java和eclipse等，不是源代码编译，请大家不要误会了。

其实通过rpm包安装东西很简单，麻烦的是有很多rpm是要根据顺序进行先后安装的，你找半天才能追溯到要先装哪一个rpm包，非常繁琐。

所以这篇文章就是我在实际中记录了正确的先后顺序，跟着安装就可以了，免去了不断查找依赖rpm的麻烦。

废话不说，这是我的实践帖，没有太多时间整理，当中也不免废话，放在这里权当做个笔记吧。

1） For gcc-4.1.2.44:

rpm -ivh libgomp-4.3.2-7.el5.x86_64.rpm

rpm -ivh kernel-headers-2.6.18-128.el5.x86_64.rpm

rpm -ivh glibc-headers-2.5-34.x86_64.rpm

rpm -ivh glibc-devel-2.5-34.x86_64.rpm

rpm -ivh gcc-4.1.2-44.el5.x86_64.rpm

2） After step 1, for gcc-c++-4.1.2.44

rpm -ivh libstdc++-devel-4.1.2-44.el5.x86_64.rpm

rpm -ivh gcc-c++-4.1.2-44.el5.x86_64.rpm

3. After step 2, for automake-1.9.6-2.1.noarch.rpm

rpm -ivh imake-1.0.2-3.x86_64.rpm

rpm -ivh autoconf-2.59-12.noarch.rpm

rpm -ivh automake-1.9.6-2.1.noarch.rpm

红帽子光盘里面有如下的java RPM包：

java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64.rpm

java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.i386.rpm

java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.x86_64.rpm

java-1.4.2-gcj-compat-javadoc-1.4.2.0-40jpp.115.x86_64.rpm

java-1.4.2-gcj-compat-src-1.4.2.0-40jpp.115.x86_64.rpm

java-1.6.0-openjdk-1.6.0.0-1.2.b09.el5.x86_64.rpm

java-1.6.0-openjdk-demo-1.6.0.0-1.2.b09.el5.x86_64.rpm

java-1.6.0-openjdk-devel-1.6.0.0-1.2.b09.el5.x86_64.rpm

java-1.6.0-openjdk-javadoc-1.6.0.0-1.2.b09.el5.x86_64.rpm

java-1.6.0-openjdk-src-1.6.0.0-1.2.b09.el5.x86_64.rpm

javacc-4.0-3jpp.3.x86_64.rpm

javacc-demo-4.0-3jpp.3.x86_64.rpm

javacc-manual-4.0-3jpp.3.x86_64.rpm

java_cup-0.10-0.k.6jpp.1.x86_64.rpm

java_cup-javadoc-0.10-0.k.6jpp.1.x86_64.rpm

java_cup-manual-0.10-0.k.6jpp.1.x86_64.rpm

红帽子光盘里面有如下的MySQL RPM包：

mysql-5.0.77-3.el5.i386.rpm

mysql-5.0.77-3.el5.x86_64.rpm

mysql-bench-5.0.77-3.el5.x86_64.rpm

mysql-connector-odbc-3.51.26r1127-1.el5.x86_64.rpm

mysql-devel-5.0.77-3.el5.i386.rpm

mysql-devel-5.0.77-3.el5.x86_64.rpm

mysql-server-5.0.77-3.el5.x86_64.rpm

mysql-test-5.0.77-3.el5.x86_64.rpm

=====================================================================

如果是MySQL-server-community-5.1.53-1.rhel5.x86_64.rpm（即community版本），就不需要后面那些prerequisite，连mysql-5.****都不需要，安装MySQL-server-community-5.1.53-1.rhel5.x86_64.rpm后，有提示为：

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !

To do so, start the server, then issue the following commands:

/usr/bin/mysqladmin -u root password 'new-password'

/usr/bin/mysqladmin -u root -h localhost.localdomain password 'new-password'

Alternatively you can run:

/usr/bin/mysql_secure_installation

which will also give you the option of removing the test

databases and anonymous user created by default.  This is

strongly recommended for production servers.

See the manual for more instructions.

Please report any problems with the /usr/bin/mysqlbug script!

Starting MySQL.[  OK  ]

Giving mysqld 2 seconds to start

perl-DBD-MySQL and mysql is needed by mysql-server-5.0.77-3.el5.x86_64

first:

[root@localhost Server]# rpm -ivh mysql-5.0.77-3.el5.x86_64.rpm

warning: mysql-5.0.77-3.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

error: Failed dependencies:

        perl(DBI) is needed by mysql-5.0.77-3.el5.x86_64

then install rpm -ivh perl-DBI-1.52-2.el5.x86_64.rpm,

then mysql-5.0.77-3.el5.x86_64.rpm is ok.

Second:

rpm -ivh perl-DBD-MySQL-3.0007-2.el5.x86_64.rpm

then mysql-server-5.0.77-3.el5.x86_64.rpm is ok.

warning: eclipse-rcp-3.2.1-19.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

        /usr/bin/rebuild-gcj-db is needed by eclipse-rcp-3.2.1-19.el5.x86_64

        /usr/lib64/eclipse/plugins/org.eclipse.swt.gtk.linux.x86_64_3.2.1.v3235.jar is needed by eclipse-rcp-3.2.1-19.el5.x86_64

        java-gcj-compat >= 1.0.64 is needed by eclipse-rcp-3.2.1-19.el5.x86_64

        libgcj >= 4.0.2 is needed by eclipse-rcp-3.2.1-19.el5.x86_64

        libgcj_bc.so.1()(64bit) is needed by eclipse-rcp-3.2.1-19.el5.x86_64

        libswt3-gtk2 = 1:3.2.1-19.el5 is needed by eclipse-rcp-3.2.1-19.el5.x86_64

rebuild-gcj-db is in gcj (GNU compiler for Java), then you need:

warning: gcc-java-4.1.2-46.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

        libgcj = 4.1.2-46.el5 is needed by gcc-java-4.1.2-46.el5.x86_64

        libgcj-devel = 4.1.2-46.el5 is needed by gcc-java-4.1.2-46.el5.x86_64

        libgcj-tools.so.7rh()(64bit) is needed by gcc-java-4.1.2-46.el5.x86_64

        libgcj.so.7rh()(64bit) is needed by gcc-java-4.1.2-46.el5.x86_64

        libgij.so.7rh()(64bit) is needed by gcc-java-4.1.2-46.el5.x86_64

then

warning: libgcj-4.1.2-46.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

Preparing...                ########################################### [100%]

   1:libgcj                 ########################################### [100%]

warning: libgcj-devel-4.1.2-46.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

        zlib-devel is needed by libgcj-devel-4.1.2-46.el5.x86_64

        /usr/lib64/libz.so is needed by libgcj-devel-4.1.2-46.el5.x86_64

[root@localhost Server]# rpm -ivh zlib-devel-1.2.3-3.x86_64.rpm

warning: zlib-devel-1.2.3-3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

   1:zlib-devel             ########################################### [100%]

[root@localhost Server]#

[root@localhost Server]# rpm -ivh libgcj-devel-4.1.2-46.el5.x86_64.rpm

   1:libgcj-devel           ########################################### [100%]

Then gcc-java-4.1.2-46.el5.x86_64.rpm is ok.

[root@localhost Server]# rpm -ivh libswt3-gtk2-3.2.1-19.el5.x86_64.rpm

warning: libswt3-gtk2-3.2.1-19.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

        /usr/bin/rebuild-gcj-db is needed by libswt3-gtk2-3.2.1-19.el5.x86_64

        java-gcj-compat >= 1.0.64 is needed by libswt3-gtk2-3.2.1-19.el5.x86_64

in rh5.4 dvd, there only java-1.4.2-gcj-* packages, no for java-1.6.0.

and java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64.rpm need jpackage-utils in dvd.

too many to do in a cycle.

So you should use –nodeps option now.

Follow my steps:

warning: java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 37017186

        gjdoc is needed by java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64

now you use:

rpm -ihv --nodeps antlr-2.7.6-4jpp.2.x86_64.rpm (antlr need by gjdoc)

rpm -ivh --nodeps gjdoc-0.7.7-12.el5.x86_64.rpm

now  java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64.rpm  is ok.

Then rpm -ivh libswt3-gtk2-3.2.1-19.el5.x86_64.rpm is ok.

Then rpm -ivh eclipse-rcp-3.2.1-19.el5.x86_64.rpm is ok J

Also, then eclipse-rcp-sdk-3.2.1-19.el5.x86_64.rpm can be installed.

本文转自 xkdcc 51CTO博客，原文链接：http://blog.51cto.com/brantc/514899，如需转载请自行联系原作者