After pulling over, we first saw in the rearview mirror the distance between the body and the shoulder. Now the feeling seen in the mirror surface, the spacing is about less than 10 cm, and the body is parallel to the shoulder.
Let's look at the position where the front right corner of the hood coincides with the edge of the shoulder from the first point of view, if your vehicle can see the hood in the driver's seat, then refer to this position;
You can also observe the lower right corner of the front windshield, which coincides with the edge of the curb, and if your vehicle can't see the hood, you refer to this position. The sense of distance seen in this right rearview mirror and the position that coincides with the shoulder in the lower right corner of the hood or front windshield is the position where your right body is about 10 cm away from the shoulder.
Let's get out of the car and take a look, this spacing is about 10 centimeters or so;
Looking at the back of the car, this spacing is also about 10 centimeters.
The above method of observing the distance between the cars in the car will vary depending on your model and the height of the driver's seat, and the observation effect will vary.
Specifically, according to their own model to observe, and according to the observations to remember this 10 cm spacing, the feeling in the mirror of the rearview mirror.
And in the front right corner of the hood coincides with the shoulder, or the lower edge of the front windshield coincides with the shoulder, make a mark, and later you can use it as a distance reference when you pull over.
The method of judging the distance of the right shoulder of the road introduced above has also been shared online, because it is a static judgment method, so it is not practical in the process of pulling over. In the process of pulling over, the problem that bothers everyone is: after parking, it is found that the distance between the body and the shoulder is too far,
If you want to get closer, the front and rear wheels are easy to squeeze into the shoulder, especially the front wheel is easy to squeeze into the shoulder. Below I will teach you one, one in and one out of the small distance of the pullover parking technique.
The vehicle drove through the aisle, intending to stop on the right side of the road, hit the right, and gradually moved to the left as the right front corner of the vehicle began to coincide with the edge of the shoulder.
Because the degree of sway of the vehicle to the right may be different each time, the reference point will be different. In order to avoid scraping the right front corner to the shoulder or the front wheel squeeze is to quickly turn to the left, with the direction of the return, the body begins to straighten, at this time, in the right rearview mirror will see that the body and the shoulder are still far away.
It doesn't matter, just pour it in one to park the vehicle as far as you want. Hang up the reverse gear, look at the right rearview mirror to the right to hit the direction of reversing, first see the right rear corner of the vehicle covering the shoulder;
Then, see the farthest end of the front door handle begin to align the shoulder edge of the road, at this time to the left,
With the right rear corner thrown to the left away from the shoulder; the front half of the body is also approaching the shoulder to the right,
When the body tends to be parallel to the shoulder, stop back in the right direction.
Hit the left or the right, how much? Depending on the distance between the shoulders, usually in the case of large spacing, you can circle in multiple directions to the left or to the right. This method of pulling over the side of the car, generally does not need too long reverse distance, so the direction of playing more than a circle, but the steering wheel operation speed to be fast, the vehicle began to hit the direction as soon as it moved,
When the point of seeing the direction of return in the rearview mirror appears, it is also necessary to return the direction in time.
When parking on some narrow narrow roads, in order to minimize the width of the road, the vehicle should be parked close to the shoulder of the road. If you are still not satisfied with the spacing during the first reversing process, you can continue to hit the right slightly,
When the front door handle is observed in the rearview mirror, fully cover the shoulder of the road, turn back to the left;
Stop when you see that the front and rear bodies almost coincide with the curb edges. At this time, the actual spacing is only about two or three centimeters apart. If you need this distance to park on the side, it is not easy to park well, and if you pursue a hand, it is easy to squeeze into the shoulder of the road, so you can continue to reverse and play a small way to the shoulder of the road.
Novices may encounter many problems just after taking this book on the road, such as: how to reverse the car into the warehouse how not to scratch, how to park in the side direction, how to judge the distance between the front and rear cars on the road, what skills are used to drive in the curve, how to make the car safer on the narrow road, how to reverse the obstacle in the community, how to ensure that the car is not scraped through the limited width pier, these uncles have taken videos and explained in detail. The list has been listed for you, pay attention to the public account "Learn driving skills every day", reply to the keyword "novice cheats" can be watched