1. The large gold chain is made of ring buckle
Let's look at a square chain style.
2. The color sorter separates the red and green tomatoes
come... Feel the ripe (red) and unripe (green) tomatoes are separated, the color sorter here is not blown out by high pressure, but directly "flying"...
3. Multi-piece packaging process
Push one pack, push one pack, complete a large package of sanitary napkin separation.
4. French fries conveyor belt
The freshly oiled fries are also carried with oil, and a special perforated conveyor belt is used, which is drained with oil and then followed.
5. Ice cream filling
Different ice cream fillings are not the same, if it is filled with pure chocolate syrup, it will be a crisp chocolate bar when you eat it, and the liquid caramel underneath is filled.
6. Flip the slices
In just over ten seconds, one side of the toast slice is baked, and then there is an automatic shovel to turn the toast slice over.
7. Mold cleaning of medical latex gloves
Even when drying in the oven, the hand mold on the assembly line must be rotated constantly, so that the entire latex can be evenly distributed.
8. (Foreign) dumpling skin pressed edge kneading
The dough that has been wrapped in the filling is cut by a special hob.
9. The process of folding paper
To see the folding process from the front, at the speed of the machine, you can fold 16 sheets of paper per second.
10. Separate the egg yolks
This long v-groove has an opening at the bottom. When the egg liquid flows through, the overall yolk continues to slide forward, and the egg white leaks into the V-shaped groove opening.
11. Salad packing
After the packaging is sealed, the salad inhibits the respiratory effect of the vegetables, which further makes the shelf life of the salad reach more than 10 days.
12. Ballpoint pen writing test
Put the sample refill on the tester and keep drawing circles... Each qualified refill can be drawn for 100 meters, after which the worker can check the color, color, uniformity, etc. of the pattern to determine whether the refill is qualified.
3. Semi-automatic cutting
Because the spatial position of each spoke is also different, it is necessary to use an automatic knife holder to cut out spokes of different lengths.
14. Bounce cotton
The predecessor of the flower machine in China was the ancient cotton playing craft, using a bow with strings, and then tapping the strings with a mallet, and loosening the cotton wool with the flick.
15. Art knife cutting paper test
The paper cutting test of the art knife, I also watched it for 5 minutes...
16. Place the mooncakes
The pressed mooncakes fall into the baking pan in order, and after being laid out one by one, they are automatically sent to the oven for baking.
17. Convey the milk
Finally, a single package of drinks is sent to the packaging assembly line
18. Remove excess sealing film
Use a cutting separator to uniformly remove excess aluminum foil seals.
19. Rolling cotton tires
The machine slices the stacked fiber mesh into sections and rolls to form a large cotton tire. The longer and heavier the fiber segment, the higher the pillow, and because the fiber segment will be denser and tighter after flattening, of course, it will be harder to lean on.
20. Drizzle with chocolate liquor
Chocolate pie just came out after the chocolate bath... ( ̄『 ̄)
21. Insert the highlighter tip
In the factory, the nib is inserted in front of the pen tube. The nib is also made of a special polyester material, which will have a very fine vein on it, and can use the capillary phenomenon to absorb the ink of the refill into the nib.
22. Roll round marbles
Each prototype of the marble will fall into two spiral rollers and will gradually roll into small balls.
23. The bolt head is stamped into a hexagon
Only each steel rod needs to be inductively heated for 30 seconds, and the bolt head can be sent to stamping, and the bolts that come out at a punching pressure of 60 tons do not have a single seam.
24. Squeeze the pasta
In the extrusion molding process with different molds, the shape of the pasta that comes out is naturally different, such as the formation of macaroni, this process is very sour...
The extruded macaroni is then quickly cut off by the rotating blade at a fixed speed.
25. The machine "screws" the peach
I have written before how to cut off the peaches in the assembly line of the factory, the article is here "Industrial quick-frozen let you eat the fresh strawberries of the anti-season at any time", the cute little cute people who are rich in detective (qiang) suo (po) jing (zheng) gods chase and ask "Peel the skin?" Why don't you go?" Today I found an assembly line of canned peaches to solve this problem.
26. Seal the mouth of the ampoule
The robotic arm clamps the upper part of the bottle opening, heats the middle with a high temperature open flame, and then pulls it to break, and at the same time that the glass is burned, the glass opening melts and seals. I once heard medicine students joke when they ate, calling this process "pulling silk ampoule"...
The following figure shows the sealing cap formed by the glass melting immediately after the opening is removed. Because there is a certain distance between the liquid medicine and the bottle mouth, and the melting and solidification of the glass is very rapid, it will have no impact on the quality of the liquid medicine.
27. Remove defective products with high-pressure air jets
The factory will use a high-speed camera to shoot the tape, and the computer will identify whether there is dust or debris mixed in.
If a defective product is identified, this small roll will be blown away from the conveyor belt by high-pressure gas, and this design is also a kind of color sorter that "recognizes kicking away green tomatoes and blowing away bad rice with high pressure", and the proportion of defective products can be guaranteed to be less than 2%.
28. Automatic pencil tip... It is automatically screwed on
The pen head will be screwed one by one by the machine.
29. Coso is transferred in batches
The freshly baked bread is still very soft and the temperature is still very high, requiring negative pressure rubber suction cups to gently transfer them to the cooling conveyor belt.
30. Sandwich of ice cream cookies
Then the discharge tube steadily produces the ice cream, the biscuits on both sides are pushed down by the small push plate above, and the groove wheel below turns, and the two biscuits are sandwiched away with a whole piece of ice cream (ˉ『ˉ)
Source of this article: Interesting Manufacturing