In order to ensure the long-term reliable operation of the unit, the commissioning of the unit should be run by the professionals of the equipment manufacturer or personnel with certain air energy knowledge under the guidance of the professionals of the equipment manufacturer, and the daily operation and maintenance should also be carried out by professionally trained air energy personnel.
Installation case
The unit should regularly carry out daily inspections according to the same items of the relevant parameters of the operation stage, and pay special attention to the following items:
1. According to the instructions, the unit is required to carry out regular maintenance to ensure that the unit is in good operation.
2. Do not directly contact the refrigerant exhaust parts with your hands to prevent burns.
3. Do not short-circuit the line connected to the protective device, otherwise it may cause an accident.
4. If a fire is unfortunate, the main power supply should be turned off immediately and extinguished with a fire extinguisher.
5. The unit shall not be overworked near flammable gases (paint, paint, gasoline, etc.) to prevent fire or explosion.
Zhejiang Yangfan Energy Saving Development Co., Ltd. administrative building
In the process of unit operation, attention should be paid to the exhaust and suction pressure of the system, and if abnormal is found, the cause should be found in time to eliminate the fault. Regularly check whether the electrical wiring is loose, the contact point oxidation, foreign objects, etc. cause poor contact, if necessary to deal with it in time. Always pay attention to the operating voltage, current, and phase balance.
10p ultra-low temperature
Check the reliability of electrical devices from time to time, and replace them in a timely manner for failure and unreliable devices. Control and protect the equipment, do not arbitrarily adjust the set point in the field.