Suzhou thousand-level electronic dust-free workshop high efficiency filter how to install
With the continuous development of the industry, the application of dust-free workshops in various industries is becoming more and more extensive. High efficiency filter is a kind of purification equipment commonly used in dust-free workshops, which is mainly used to trap particles of dust and various suspended solids above 0.5um as the end of various filtration systems. So, how to install the high efficiency filter in the dust-free workshop? Below, Kunshan Qingyang Purification Project combines 20 years of purification workshop construction experience to explain to you in detail.
Before the installation of the HEPA filter, the product packaging should be unpacked at the construction site of the dust-free workshop, and the appearance of the HEPA filter should be inspected, including checking whether the filter paper, sealant, and frame are damaged. At the same time, it is necessary to check whether the heparate filter has a product certificate and whether the technical performance meets the design requirements. Kunshan Qingyang Purification Project believes that the clean grade is a dust-free workshop with a clean grade of 100 or higher, and the high-efficiency filter should be detected on the spot before installation, focusing on checking whether the high-efficiency filter has quality problems such as damage and leakage.
Before installing the high-efficiency filter in the dust-free workshop, it is first necessary to thoroughly clean and clean the interior of the dust-free workshop. If there is dust in the dust-free workshop purification air conditioning system, it should be cleaned again to meet the cleaning requirements. Before installing a high-efficiency filter, the dust-free workshop air conditioning system should be put into trial operation, with a continuous operation time of more than 12h, and cleaned again. If the HEPA filter is installed in the ceiling, the inside of the ceiling should be cleaned.
Dust-free workshop high-efficiency filter, in the transportation process should be handled lightly, to avoid the generation of violent vibration and collision. Kunshan Qingyang Purification Project reminds that the frame for installing high-efficiency filters in the dust-free workshop should be flat. The sealing between the high-efficiency filter and the frame can be used to seal the gasket, sticker, negative pressure seal, tank seal and so on. Either way, wipe the surface of the filter frame and other contact materials clean to avoid contamination.
