What is the butyl rubber ROHS2.0 test? How to handle butyl gum ROHS certification testing? Butyl glue RoHS2.0 test ten items: handle butyl glue RoHS testing process:

Butyl rubber is a kind of synthetic rubber, which is synthesized from isobutylene and a small amount of isoprene. It is generally used to make tires. In the field of building waterproofing, butyl rubber has been fully popularized in the name of environmental protection instead of asphalt. Butyl glue has good air tightness. It is also resistant to heat, ozone, aging, chemicals, and has shock absorption and electrical insulation properties. It has good resistance to sunlight and ozone and can be exposed to animal or vegetable oils or oxidizing chemicals.

<h1 class="pgc-h-arrow-right" data-track="2" how to handle ROHS certification testing for butyl gum >? </h1>

On 31 March 2015, the European Parliament and the Council of the European Union set out the requirements of the Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS-2011/65/EU) and its Amending Directive (EU) 2015/863.

Following the issuance of this revised Directive, EU Member States will need to translate the Directive into national regulations and implement it by 31 December 2016. And from 22 July 2019, all electronic and electrical products exported to The European Union (except medical and monitoring equipment) are required to meet this restriction; From July 22, 2021, medical equipment (including in vitro medical equipment) and monitoring equipment (including industrial monitoring equipment) will also be included in the scope of this control.

Therefore, electronic and electrical products that want to be exported should pay attention to this aspect. RoHS testing is to detect these electrical and electronic equipment containing substances harmful to human health through professional institutions or instruments.

<h1 class="pgc-h-arrow-right" data-track="6" >butyl glue RoHS2.0 detection ten items:</h1>

铅(Pb) 1000ppm

Cadmium (Cd) 100ppm

汞(Hg) 1000ppm

Hexavalent chromium (CrVI) 1000ppm

Dibutyl phthalate (DBP) 1000ppm

Butylbenzyl phthalate (BBP) 1000 ppm

Bis(2-ethylhexyl) phthalate (DEHP) 1000ppm

Diisobutyl phthalate (DIBP) 1000ppm

Sum of polybrominated biphenyls (PBBs) 1000 ppm

Sum of polybrominated diphenyl ethers (PBDEs) 1000 ppm

<h1 class="pgc-h-arrow-right" data-track="17" > handle the roHS detection process of butyl gum:</h1>

1. Project application - submit an application to the supervision of the testing agency.

2. Data preparation - According to the requirements, the enterprise prepares the relevant certification documents.

3, product testing - the enterprise will be tested samples sent to the laboratory for testing.

4. Preparation of report - certified engineers write reports based on qualified testing data.

5. Submit for review - the engineer will review the complete report.

6. Issuance of certificate - after the report is audited correctly, the report is issued.