First of all, broken strings are inevitable! Strings also have a lifespan, and generally the life of a string is only one or two years! The treble strings are thinner and easier to break!
There are also the following reasons for the broken string: 1, the performance of the master: the strength of the string is too large, the speed is too fast!
2. The strings are aging and rusty.
3. The contact point between the code and the string is not smooth.
4, the quality of the strings themselves is problematic! Isn't it true that all that I am given is a defective product?
5, the tone is too high.
6, the strings are too tight!
Don't underestimate the maintenance of the strings, these points are very critical!
1, the high string of the kite is easy to break, you can purchase 1-9 strings as a backup, the bass string is generally not easy to break. Broken strings should be repaired immediately.
2, often put the tone accurate, in order to maintain the tension of the string and the purity of the timbre.
3, the kite string is a steel wire wrapped in nylon, such as rain and moisture or excessive hand sweat will make the steel wire rust inside, the string is yellow, easy to age. Usually do not use the tide hand to play the kite, do not use the tide cloth to wipe the strings, do not use a knife or other hard instruments to scrape the strings, dust please use a soft brush, dust should be dealt with in time.
4, before playing the kite, wash your hands and dry them, in order to prevent the fingers on the water, sweat, oil, etc. stuck to the string, so that the string is dirty or rusty and shorten the use period, in order to prevent dust, it is best to make a kite or kite cover, the end of the playing will be the kite cover (cover) well.
5, usually put the kite indoors, can not rain, do not put in the sun for a long time exposure, do not get close to the heating and other extremely dry environment.
6, such as a short period of time do not play the kite, do not loosen the string or remove the kite code, as long as the moisture, sun, ash can be, can not be directly placed on the ground or hung on the wet wall. When the humidity is heavy, put the guzheng into the box and put the desiccant in the box.
7. When moving the zither column to calibrate, the hand should be used to first touch the string upwards, reduce the pressure of the string on the zither column and then move, so as not to damage the zither string and scratch the panel.
8. Frequent use can keep the strings and resonance of the instrument in a good vibrational state for a long time, which is conducive to further harmonization between the structure of the instrument and the relative stability of the timbre of the kite.