Author: Long Fei The article is transferred from The Mo Soul Zhi (78DM), anyway, it is the word of the Dragon Fei code, no matter what
Today, I just received a sample review of the latest work "MCT-J02 Kai No Tiger Takeda Shingen" of Moshou MOSHOW. This is still the first original model finished product under Moshou, how does it perform? Let's take a look! ▼
Outer box sealing
The outer box is a large batch, mainly based on model photographic photos as the outer box sealing, in addition to the large is very heavy. Obviously, it is not the day of moving bricks, but it is doing the work of moving bricks. ▼
The seal also reads "The finished model of the most advanced super movable alloy", which shows the confident gold content of Moshou. ▼
Full accessories at a glance
There are many accessories, such as large platforms, knives, guns, halberds, axes and super weapons attached. ▼
In addition to the large accessories, there are also some small ones, mainly the connectors used to connect the sabre. There are 7 hand types in total, including the replacement styling hand and the standard boxer. And the "Suwa Dharma Helmet" hairstyle that replaces the back of the head. ▼
Instructions
The attached instruction manual contains the organism setting information and a few pages of comic stories about many young ladies. It is a history of the science body for the player. It is said that the story film continues to be serialized on Weibo, and those who are interested can go after it.
Body shape
The overall shape is very strong, and as its name "Kai No Tiger" follows the strong Japanese martial style, but in terms of features, it weakens some of the decorative details of "Takeda Shingen" (such as ghost-faced headdresses, wind forest volcano fans, etc.). The whole body is different red painted, and it is known to be a macho man at a glance, but according to the instruction manual, the driver is a JK miss sister. ▼
The back is slightly thinner, and the details are richer than the front. Semi-gloss color as the main tone, plus metallic details of the paint makes the whole body feel more solid, personally like this color matching style. ▼
This time, the mold life is still the "1/72" ratio common in the national model, and the total height reaches 28cm. Mb Xiaoqiang next to him swung in and became a younger brother. ▼
Since the model itself adopts an all-alloy skeleton as the internal structure, the gold content is very heavy. In the absence of equipment on the body alone, the total weight has reached 1 kg! ▼
Movable & detailed
The modeling detail convention is a common sense of hard edge diamond angle, coupled with different red color difference colors, as well as detail color separation to make the visual sense very rich. The shape of the tiger's head on the chest is a bit joyful, the tiger's mouth cannot be opened, and I personally feel that the chest can be stronger. ▼
The green color of the eyes is painted with a fluorescent effect, and it will be particularly bright when illuminated by violet light. ▼
Of course, there are LED lights installed in the head itself, and there is no accessory coin cell battery in the model, which needs to be purchased separately. (Holiday + epidemic stationery stores are closed, can not buy button batteries, had to show later). After attaching the helmet, press the green "sensor" detail to light up the eye lamp. ▼
The back of the helmet can be removed to replace the hair styling parts of the "Suwa Dharma Helmet". ▼
After the replacement, the whole head shape can also be regarded as a bit of "Takeda Shingen" of the visual sense, the face shape is more like the Mask of japanese samurai, there are also details like teeth, but also can not open. The golden blade antenna is not deliberately sharpened, or more humane. ▼
The parts of the "Suwa method" are painted in an orange-white gradient, and the hair is more like a Saiyan. ▼
The movementability of the head is very good, in order to avoid the head because of the suwa method of modeling parts hinder the movement, but also deliberately made a stretch structure in the neck, you can pull up a larger space to the head. ▼
The shape of the shoulder armor is very martial armor style, and the details of the transfer printing of the left and right shoulder armor are different. (The shoulder armor can also be one size bigger...) ）▼
The interior of the 4-layer shoulder nail has a good mechanical detail, and each layer can be moved independently with the help of spherical joints. ▼
Underneath each shoulder armor there is a detail of a "heat sink", accentuated by the silver livery. ▼
The outer shoulder nail is mounted with a 4mm jack, and this jack always feels like it implies that there will be replacement equipment in the future. (Accessory pack you know)▼
Compared with the tough body shape, the arms appear slightly rounded and a little muscular. ▼
The arm is lifted flat at 90 degrees without pressure, and the shoulder armor can also be properly lifted to make room for movement of the arm. ▼
There is a small movable structure in front of the small shoulder nail. ▼
The elbow is bent in two segments, and the palm of the hand can be bent to the shoulder position. ▼
When the arm is bent, the hydraulic tube details of the upper arm will also be moved. ▼
The replacement design of the styling hand has also become more humane, it is replaced by a C-type snap, the gray parts are made of a material with better toughness, and there is no obvious whitening after multiple replacements, and the spherical movable shaft is buried in the gray parts. ▼
The waist has a certain lateral angle. ▼
The mobility of the waist is also very powerful, although there is no gear joint, but it also has a good holding force. ▼
When the waist is bent, the details of the back will also move, and the detail structure of the endoskeleton perfectly obscures the light position of the joint. ▼
The shoulder joint can be further opened, and the internal details are painted in a metallic color, which is very delicately depicted. The square jack is used to hang the knife this time, and the next time there may be additional equipment! ▼
The front skirt armor is relatively small, and the side skirt armor adopts a similar design to the shoulder armor. ▼
The entire front skirt armor can be pressed downwards, and there is a spring structure springing back inside. (Friends asked me why I was hitting a plane on a toy).)
The side skirt armor has a jack for the weapon, and the detail decoration is similar to the shoulder armor. ▼
The rear skirt armor is a more spacious design. ▼
It can even be unfolded to a certain extent. ▼
This time, the side skirt armor is designed with multiple movable shafts to make room for leg mobility. ▼
However, the connection to the side skirt is actually a C-type snap, although it is easier to play off, but in fact, it is more convenient for the player to remove and adjust the joint angle and then install it. It's probably just a high and low EQ understanding. ▼
The shape of the legs and arms echo the more sleek lines. (This leg is also too heretical)▼
The details are still very good. ▼
Thanks to the improved mobility of the skirt nails, the legs also have a good movable performance. It is indeed super movable. (But it's really hard to play with such a heavy toy)▼
When the legs are bent on the knees, the outer armor will have a burst armor linkage, and the soles of the feet also have a 3-segment movable structure to imitate the real person's movement. ▼
Kneel on one knee stress-free. ▼
When the knee is bent, the details of the skeleton inside are also revealed, and some of the details are color-separated to look more precise. ▼
In addition to the one-knee kneeling posture, the kneeling posture common to Japanese samurai can be achieved. Attached to a knife holder can be placed on the sword. Is the screen background also left with accessories packed out? ▼
The sitting position with the legs fully pressed to the ground is very standard. ▼
The grounding of the soles of the feet is also very good, and the counterweight of the body itself is also concentrated in the lower body, and it is easy to stand firmly by adjusting the angle. ▼
In addition to the mechanical details depicted at the bottom of the foot, there are two large magnets. ▼
Floor bracket
The attached platform is a magnetic suction plate with a length and width of 28 cm, and the base of the bracket has 8 strong magnets, which can be tightly combined with the platform. Although the magnetic combination is novel and convenient, it will be very serious to scratch the pattern on the ground platform. ▼
The weight of the platform alone is 771 grams. ▼
The connection of the bracket is relatively simple and rough, and the cover plate of the body crotch can be installed. ▼
Although the metal support rod cannot adjust the angle, it is very stable. ▼
Weapon accessories
There are many combinations of weapons, and the long tomahawk and the ten-character gun can be used as separate weapons. The rods of the grip are made of hollow metal rods. ▼
It can also be replaced with a double axe weapon, the weapon rod gives a long one a short, but it is really too tight to replace the long with a short one. Some say it was used to make a double-headed axe. ▼
The long samurai sword can also be combined with the handle of the gun to form a "sword", and the ten characters and the handle can be combined to become a military match. ▼
Three katana swords were given, one long knife was the Daitai sword and two short knives were the fighting knives. Although each of the three knives has a name, there is no name depiction on the knife, and the two knives are more similar. ▼
Although the body of the knife is made of plastic, each knife has a wavy coating on the blade. ▼
The long knife is only attached on the back. ▼
The double knife can be attached on both sides of the waist, or it can be combined to mount on one side of the waist. ▼
POSE TIME
postscript
As the first model finished product of The Original IP "Ancestor Effect" under Moshou, when it was launched, it was picked up by the model friends because of the name of the Japanese samurai, but if this name is excluded, this production I think is still very worthy of affirmation, at least the quality and "gold content" have been recognized, according to the weight data of this time, this work is also a veritable "heavyweight" product. The playing experience is also very good, except that it is too heavy, and the playing process is like lifting iron.
As for how to plan the comic story that wants to create a brand IP so that the product can be added to the icing on the cake, I think this point needs to be strengthened. At least you can find a blogger to specialize in science popularization, such as me.
Product information
●Debut works: "Ancestor Effect"
●Alloy, ABS, etc. have been colored movable models
●Exhibiter: Imitoshi
●Release Date: July 2021
●Price: 680 rmb
●Full Height: 28cm (1/72)
House Jun comments: Seriously, the price of 680 yuan is really worth playing, worth the rotten!