Modern people in the decoration in addition to pay attention to the overall beauty, but also pay great attention to home environmental protection. As a high-tech new decorative material, diatom mud creates a novel beauty for home life, and is very natural and environmentally friendly, and it is sought after by countless consumers as soon as it is listed. So, how does diatom mud construction work? Is there a reasonable diatom mud construction plan? Will the specific construction be troublesome? Let's take a look at it with Xiaobian now.
How is diatom mud constructed?
First, the flat light method
There are many owners who want healthy and environmentally friendly materials, but also want traditional construction methods, which is a challenge for materials such as diatom mud.
Construction method: First use a spatula to mix the material shallow batch coating layer on the base surface, without too much area, about 80cm width; Then follow the same direction to apply a second time, this process should pay attention to see if it is uniform and flat without bubbles, the coating is about 1mm-1.2mm. When the construction of diatom mud must wait for the surface to be acupressed with acupressure and there is no obvious indentation, it is then applied in the same direction for the third time, and the thickness is 0.8-1m. In the process of applying, pay attention to the strength of the push knife, do not use too much force, do not repeatedly press the light.
Second, the spraying method
Diatom mud construction and spraying method, very suitable for a relatively large area of the family, construction points: the first spray in order to cover the base layer, to prevent dew bottom. When you touch the wall with your hand without touching your hand, start spraying it a second time. The texture effect of the spraying method is relatively single, mostly a concave and convex texture. After spraying, immediately clean the protective tape and straighten out the edges of each adhesive tape. The order of spraying is very important, and the principle of "first far and then close, first up and then down, first inside and then outside" should be followed. For example, the roof is first covered and then the wall is sprayed, and the interior is sprayed first in the aisle and stairwell.
3. Art Law
Some owners prefer artistry. This requires the use of various tools to create different styles of texture, even if the same texture pattern, different masters, the finished product is also different, and the craftsmanship of the builder is closely related. So be sure to ask professional and skilled workers to construct. The art method is also a method of diatom mud construction.
Tools include rollers, trowels, brushes, screens, etc. From the perspective of texture performance, there are many kinds of patterns, there are realistic techniques, and there are also abstract performances.
In the construction of the must use clean water, do not add other ingredients to stir the initial may be more viscous and laborious, just continue to stir.
Diatom mud construction tools
Diatom mud construction needs attention
Because the diatom mud is about 48 small to dry completely (it cannot be moved during this period), then a small amount of water can be sprayed with water, and after drying, the surface float is gently wiped with a clean towel. Air conditioning, fans or windows should not be turned on during construction. If it dries too quickly, it will disrupt the difficulty of texture construction.
Editor's Conclusion: The above introduces the diatom mud construction plan for everyone, I hope it will be helpful to everyone. Diatom mud is very fashionable and atmospheric, but it also has relatively high requirements for the construction process, and it needs good creativity and inspiration to achieve quality assurance. Therefore, in addition to purchasing good raw materials, the construction team is also very important. Such a set of diatom mud construction program, have you received?