laitimes

A brief description of a full heat exchanger

A total heat exchanger is a system that recovers the heat energy from the exhaust air and reuses it for the supply air, which enables heat exchange between the exhaust air and the supply air.

The full heat exchanger provides reliable ventilation in full heat exchange mode and achieves significant energy savings.

A brief description of a full heat exchanger

Ventilation mode:

In spring and autumn, a full heat exchanger is sometimes used, and the "ventilation mode" can also be used to save energy.

A brief description of a full heat exchanger

By operating with the air conditioner, the total heat exchanger can be automatically placed in the optimal ventilation mode to reduce the load on the air conditioner.

A brief description of a full heat exchanger

By operating in conjunction with the air conditioner, the operating status of the air conditioner and the total heat exchanger can be set.

Running the air conditioner first in the morning when the air is fresh can further save energy.

A brief description of a full heat exchanger

Installation examples:

A brief description of a full heat exchanger

Linkage system:

A brief description of a full heat exchanger

General structure of the full heat exchanger:

A brief description of a full heat exchanger
A brief description of a full heat exchanger

How to clean heat exchange elements:

Instructions should be cleaned frequently, at least once every two years (for general office use). (Wash frequently if necessary.) )

If you find that the handle of the heat exchanger element is damaged or detached during cleaning, replace the heat exchanger element. Otherwise, there is a risk of falling.

A brief description of a full heat exchanger

1. Remove the maintenance cover

2. Remove the air filter

3. Remove the heat exchange element

After pulling out the air filter, pull out the two heat exchange elements.

4. Use a vacuum cleaner to remove dust and foreign matter from the heat exchange elements.

Please use a vacuum cleaner with a brush on the suction end.

When cleaning, gently touch the heat exchanger element with a brush. (Do not crush the heat exchanger element when cleaning)

A brief description of a full heat exchanger

General Failures:

symptoms cause countermeasure
The equipment is completely inoperable. Is the power supply unit faulty? After the repair is complete, restart.
Is the fuse burned out or the circuit breaker disconnected? Replace the fuse or set the circuit breaker.
Is the linkage full heat exchanger unit running? Use the remote control of the air conditioner to operate the unit.

This article comes from the Internet.