Hot work refers to work that can be done directly or indirectly
Process settings to produce an open flame
other than non-routine operations
Such as the use of electric welding, gas welding (cutting), electric drills, etc
Carrying out the process may produce flames and sparks
and unconventional work on red-hot surfaces
In security management
Where open flames are used, fires may be generated
maintenance operations
All belong to hot work
A set of GIFs tells you
How terrible it is to work in violation of regulations
↓↓↓
Law Popular
There are many dangers associated with electric welding
The Fire Protection Law of the People's Republic of China stipulates
Relevant workers
Specialized training in safety techniques is required
And after passing the assessment and obtaining the special operation certificate
before you can work on the job
↓↓↓
Knock on the point
Article 21 of the Fire Protection Law of the People's Republic of China stipulates that if it is necessary to use open flame operations due to special circumstances such as construction, the approval procedures shall be completed in advance in accordance with the regulations, and corresponding fire safety measures shall be taken; Operators shall comply with fire safety regulations.
Personnel who carry out fire hazard operations such as electric welding and gas welding and the operation of automatic fire protection systems must be certified to work and comply with the regulations on fire safety operations.
Article 63 of the Fire Protection Law of the People's Republic of China stipulates that anyone who uses an open flame to work in violation of regulations or smokes or uses an open flame in a place with fire or explosion hazard shall be given a warning or a fine of not more than 500 yuan, and if the circumstances are serious, he shall be detained for not more than five days.
Article 64 of the Fire Protection Law of the People's Republic of China stipulates that anyone who instructs or forces others to violate fire safety regulations and work at risk shall be detained for not less than 10 days but not more than 15 days, and may also be fined not more than 500 yuan; where the circumstances are more minor, a warning or a fine of up to 500 RMB is to be given.
Start a fire safely
The following should be noted
↓↓↓
1. Implement the safety responsibility system step by step
Strict safety management of the construction site, the implementation of the safety responsibility system step by step, the division of labor and responsibilities of personnel, strengthen the review of the construction operators, and strictly control the safety measures.
2. Welding operations are strictly prohibited in the business premises
In crowded places that are in business and use, it is forbidden to carry out construction and maintenance operations with fire hazards, such as electric welding, gas welding, gas cutting, grinding wheel cutting, painting, etc.
3. Operators must be certified to work
The construction unit must use hot operators who have passed the national formal training examination, and the welding and cutting operation items must be consistent with the qualification certificates in the special type of work operation certificate obtained by it.
4. Clean up combustibles before operation
Before operation, the surrounding combustibles should be moved to a safe place, and if they cannot be moved, they can be covered with non-combustible materials.
5. Equipped with fire extinguishing equipment during operation
Fire extinguishing equipment should be equipped for on-site welding, cutting, baking or heating and other hot operations, and fire guardians should be set up.
6. At the end of the operation, the fire is completely eliminated
After the construction operation, the fire should be eliminated immediately, the work site should be thoroughly cleaned up, and the supervision should be carried out for a period of time, and then leave the site without problems, so as to leave no hidden dangers.
Source: Ministry of Emergency Management of the People's Republic of China