Although the area of the bathroom is small, it is an area that is used very frequently by each family, and a family goes to the toilet, bathes, and washes in the bathroom, and it is inevitable that the bathroom will be occupied by one person.
The traditional dry and wet separation no longer meets the needs of the public. If the construction details are not done well, it will also cause inconvenience in life.
As a result, a new design concept became popular – the four-split design of the bathroom. It is also a dry and wet separation, but the difference is that the "four separation layout" can integrate washing, toileting, bathing, and laundry, and the essence can also effectively separate the dry area and the wet area, but there will no longer be a person occupying the bathroom, which is worth learning from.
.01
What kind of family is quadruple separation suitable for?
The bathroom is separated from each other, and it is favored for its clear partitioning, practicality and comfort, but this design has high requirements for space size, so families who adopt this method generally need to take into account the following prerequisites:
1. A family with only one balcony in the whole house
Often, some homes are designed with only one balcony in the living room, while some owners also convert the balcony into an indoor space for use.
If you put the washing machine on the balcony, it will not only affect the overall effect of the living room, but also the noise generated by the washing machine when washing clothes will also affect the family.
Therefore, placing the washing machine in the bathroom can avoid the above problems.
2. Families with 4 or more people
A family of 4 can also choose this four-separate design, and the layout between the two toilets is used separately for men and women, and they are no longer afraid of the phenomenon of grabbing the toilet.
Moreover, with the four-separate design, the toilet and washing do not affect each other. Separate out of the bathroom, sink, laundry area next to the bathroom, take off the clothes directly throw the dirty basket, the line is also convenient.
.02
Four types of detached layouts
Generally, as long as the bathroom area is greater than 5 square meters, it can be designed into a four-split layout, but if the area is too small, it will appear that the space is more depressing, and large family members will be very uncomfortable when using it. The specific layout types include the following:
1. Slotted layout
From left to right, there is a laundry room, a sink, a toilet area, and a shower area.
There is no need for a door in front of the sink, and the space is more spacious. It is recommended to have a door in the toilet area and shower area on the right side of the oil to isolate moisture and odors, a storage cabinet can be made next to the washing machine, a storage cabinet can also be used above the toilet, and a niche can be designed in the shower area.
However, the premise is that the length of this one-line layout of the four-separated toilet must be more than 3.6 meters, otherwise there will be insufficient space.
2. Tianzi layout
If the length of the bathroom is limited, but you want to do a four-split design, you can consider making a field-shaped layout.
(1) There is also no need to set up a door in the middle, the washbasin and the laundry room are on both sides, and then the wall is built to separate the toilet area and the shower area, and the two areas separated by the door are opened independently, so that the layout is clearer and reduces mutual interference.
(2) The laundry room is outside the door, with built-in design, neat and beautiful, and the countertop and the cabinet next to it can also increase the storage space. The upper part is a wall cabinet to store laundry and cleaning supplies.
(3) The washing area is designed with a double basin, the bottom is suspended without leaving a sanitary dead corner, and a full mirror cabinet is made above, preferably semi-open, and commonly used items are placed outside for easy access.
.03
Construction precautions
The independent partition of the four-separate toilet has strong practicality and high comfort, and is gradually accepted by the public. However, it is important to pay attention to the following during construction:
1. The drainage system should be reasonable
Because there are four independent partitions, there are more than 4 floor drains and toilet outlets, so it is necessary to be scientific and reasonable when setting up the drainage outlets to avoid backfilling when draining at the same time. Moreover, when installing, the toilet fecal pipe should not be connected to the sewage pipe, or the floor drain pipe should be connected to the fecal pipe, which will lead to continuous odor, affect the quality of living, and then modify it will be more troublesome.
2. Be sure to do a good job of waterproofing
The waterproofing of the four separate toilets can not be sloppy, especially when building walls in the sedimentation tank, it is necessary to pay attention to the closed water detection, and there can be no water accumulation in the sedimentation tank, and each wall must be brushed to more than 1.8 meters.
Moreover, the sewer interface must be sealed, so that there will be no water seepage and leakage while draining.
3. The selection of materials must take into account moisture-proof
The layout of the four separations can be used for storage positions, but the moisture in the bathroom is heavier, when choosing a cabinet, we must use a material with good moisture-proof performance, otherwise the cabinet will be damp and mildewed, and the gains will outweigh the losses.
Nowadays, dry and wet separation decoration is becoming a trend, and we must pay attention to drainage and exhaust problems when doing four separations, so that a good design can be implemented with high quality.
So, how is your bathroom installed?