Spring is in full bloom on Mayday
After spending a favorite vacation
Migrant workers should also be careful
Back to work
The end of the holiday is not terrible
What is terrible is the negligence of fire safety
Let's check it out
Fire safety issues in the early stages of resumption of work and production
Top 5 Personal Unsafe Behaviors
Sockets are dominated by various chargers
Because the electrical appliances in the office area are mostly powered by sockets, do not plug in too many electrical appliances, so as not to cause poor meshing of sockets and plugs, and it is best not to use high-power electrical appliances such as electric kettles.
There are combustibles piled up near the power source
Portable electrical appliances are generally small in size, have poor heat dissipation, and are prone to spontaneous combustion accidents, so they should be kept away from combustible objects such as desktops and tablecloths when used, and check the temperature at any time.
Appliances are on standby for a long time
Electrical appliances can easily cause damage to electrical appliances or induce fires when they are on standby for a long time. In addition, the charging time of mobile phones and cameras should not be too long, and the charging equipment should be unplugged when you leave work.
Cigarette butts were not extinguished in time
Smoking is prohibited in the office, and the office where smoking is allowed should have an ashtray, and the remaining cigarette butts and used fire sources must be put into the ashtray after extinguishing.
The office hallway is full of clutter
The fire safety evacuation passage in the office area should be kept unblocked, and the location of the safety exit and escape route should be familiar with the usual.
Five major business considerations
Strictly implement the main responsibility for fire safety
All units should strictly implement the main responsibility of fire safety of the unit, abide by fire laws and regulations, implement job responsibilities, organize and carry out a fire safety inspection, timely investigate all kinds of fire hazards, and carry out a comprehensive overhaul of fire-fighting facilities and equipment to ensure that all kinds of fire-fighting equipment are complete and easy to use. Strengthen the fire safety protection of key parts, and special operation operators must be certified to work.
Pay attention to the safe use of electricity
Do not connect wires privately, do not overload electricity, do not change gas pipelines without permission, replace and repair aging electrical equipment and lines in a timely manner, strictly prohibit illegal storage of flammable and explosive materials, and do not leave fire. During the shutdown, the power supply and gas pipeline switch should be turned off in time. The personnel on duty should strengthen fire safety inspections at night.
Pay attention to the safe use of electricity, keep the safety exits and evacuation channels unblocked
Keep safety exits and evacuation channels unblocked, occupied, or closed. It is forbidden to park electric bicycles or pile up sundries in the evacuation passage, and it is strictly forbidden to charge electric bicycles in stairwells and evacuation passages.
Strengthen fire protection publicity and training
Effectively strengthen fire publicity and training, improve the ability of management personnel in each position to inspect and eliminate fire hazards, fight initial fires, organize personnel to evacuate and escape, and carry out a fire extinguishing and evacuation drill for all employees. Employees of the unit should actively learn and master the common sense of fire safety, be familiar with the unit and floor environment, keep in mind the escape routes such as evacuation channels and safety exits, and evacuate quickly and orderly in the event of a fire, and do not covet property.
Implement a daily fire prevention inspection system
All units should implement the daily fire prevention inspection system, clarify the inspection personnel, content, location and frequency, focus on inspecting the use of fire and electricity, and make inspection records, timely inspect gas, electricity, fire sources and their surroundings, and eliminate fire hazards in a timely manner.
The working mode is turned on
All production and business operation units must overcome lax and paralyzed thinking
The resumption of work and production after the holiday will be safely worked
Grasp early, pay attention to detail, grasp strictly, and grasp solidly
These fire safety tips:
Please check