Redmi Pad Pro was released on April 10 with Redmi Turbo 3: Snapdragon 7s Gen 2, 12.1-inch 120Hz 2560x1600 LCD screen, 10000mAh battery + 33W fast charging, 6+128 version 1499 yuan (5G version 1999 yuan), 8+128 version 1599 yuan, 8+256 version 1799 yuan (5G version 2399 yuan).
The Harry Potter version with a storage bag, stylus, and double-sided protective case (8+256) is 2299 yuan.
PS：
- MediaTek G99's original Redmi Pad, released on October 27, 22, the first 4+128 version is 1099 yuan, and the 6+128 version is 1399 yuan.
- Redmi Pad SE for Snapdragon 680, released on September 21, 23, 899 yuan for the 6+128 version, 999 yuan for the 8+128 version, and 1299 yuan for the 8+256 version.
I would like to call it an "electronic handiwork"
No jokes, the Redmi Pad Pro Harry Potter Edition is physically an electronic Harry Potter figure.
From the packaging, to the accessories, all the way to the instructions, there are details of Harry Potter everywhere. If you don't watch Harry Potter a few times, you can't pile up such a figurine sincerity.
The unboxing process is Harry Potter cos+ "opening my heart layer by layer".
The box of the Redmi Pad Pro Harry Potter Edition (which, like the book, has a waist seal), is more refined than most flagships.
In the large box on the first floor, there is a storage bag containing a double-sided protective case. The stylus and charger at the bottom, and even the instruction manual are in special boxes.
It's a pity that the charger and card pin are not customized. But it's fun to make the storage bag into a Hogwarts "acceptance letter", the double-sided protective case into a magic textbook, and the stylus as a wand.
"Notice" storage bag containing the "Hogwarts Notebook"↑
"Notice" storage bag ↑
The interior of the double-sided case also has an easter egg↑ and stickers of faith from the four Hogwarts houses (Gryffindor, Hufflepuff, Ravenclaw, and Slytherin).
The storage bag is relatively thin and lightweight. And the double-sided protective case (which can store the stylus on the side) is really full of weight after adding Harry Potter elements.
The 299 yuan inspired stylus is 4096 levels of pressure sensitivity, less than 10g ink pressure, a minimum of 5ms delay, and an 80mAh battery (12 hours of continuous use).
The Bluetooth keyboard case priced at 299 yuan did not participate in the co-branding, 19mm key pitch, 1.3mm key travel, C-port power supply, independent switch, 210mAh battery (continuous use for 59 hours or 31.6 days standby).
The right bezel (i.e., the upper bezel when held horizontally) has symmetrically placed dual speakers, as well as a TF memory card slot (the 5G version has a SIM card slot in the card slot)↑
Extremely advanced 3.5mm headphone jack↑
The Redmi Pad Pro has an all-aluminum alloy body, 280x181.85x7.52mm, and weighs 571g. The machine is quite large, and it is a bit heavy.
There are three color schemes: dark gray, smoky green, and light bay blue, as well as a dark blue Harry Potter version.
The Harry Potter Edition will be closer to black in everyday lighting conditions. With the addition of gold accents, it is quite beautiful. Although, however, this back cover is really sticky to fingerprints.
The screen has a circle of frosted plastic brackets, slightly higher than the screen, and the transition to the middle frame is more harmonious, and the details are much better than their own little brother.
The main camera of the Redmi Pad Pro is the GC08A3 of Gekewei, and the front is OV08D10 (in the middle of the top when landscaped, there is a portrait centering function).
Quad speakers + dual microphones, IP52 protection, 7.5W reverse charging, extremely advanced 3.5mm headphone jack, and "extraterrestrial technology" memory card expansion slot (the 5G version of the card slot will have a SIM card position).
The Redmi Pad Pro's amplification is pretty good, the low frequencies are not too noticeable, but the mid and high frequencies are not bad, and the volume is loud, no matter how you hold it, it will not block all the speakers.
Objective testing
(For the screen test, the longer the brightness color bar, the better, and the shorter the color shift color bar, the better)
Vivid mode sRGB color accuracy ↑
Vivid mode P3 color accuracy ↑
The Redmi Pad Pro is a 12.1-inch 120Hz, 2560x1600 LCD screen with 249ppi and 600 nits of peak brightness, with Dolby Vision certification. Six stops of adaptive refresh rate, 240Hz touch sampling rate.
Redmi Pad Pro, this LCD screen, has average brightness uniformity and color gamut coverage. Both red and green significantly exceed the sRGB color gamut, and everyday hair colors are on the bright side.
Like mainstream tablets, there is a large room for improvement in color accuracy, just choose the default vivid mode directly, no need to toss.
And its most special thing is that Redmi gives flagship-level screen brightness, and the excitation brightness can soar to 564 nits. At 100 nits of brightness, the contrast ratio is also 1530:1.
CPU performance test (the longer the color bar in each column, the stronger it is)
GPU performance test (the longer the color bar in each column, the stronger)
Flash read/write performance (the longer the color bar in each column, the stronger)
Redmi Pad Pro是骁龙7s Gen 2（Redmi Note 13 Pro和真我12 Pro+同款，CPU和骁龙778G同级），LPDDR4x内存+UFS 2.2闪存。
Snapdragon 7s Gen 2 model SM7435-AB, Samsung 4nm process, CPU is 4 x 2.4GHz A78 + 4 x 1.96GHz A55, Adreno 710@ 940MHz, X62 5G baseband (released on 9/15/23, Redmi Note 13 Pro debut).
There is no doubt that the Redmi Pad Pro is the strongest Snapdragon 7s Gen 2 device. It doesn't have a performance mode or a score at all, because its normal mode is just like a phone's performance mode.
The smoothness is close to that of Snapdragon 7s Gen 2, Snapdragon 778G, Snapdragon 782G, Snapdragon 7 Gen 1 phones.
When the schedule is operated, the 120Hz experience hangs the iPad Air that "gives you M1, but it is still 60Hz screen + 64GB starting + 4799 yuan". It's the same as TV,The bigger the screen,The more you need to brush up。 Because the larger the screen, the farther the image elements move, the refresh rate needs to be increased to reduce the distance the image moves per frame.
(Endurance test: The test environment is 25 degrees Celsius, 200 nits screen brightness, and the test battery range is 30% to 80%. Including 30 minutes of 1080P video playback of station B, 30 minutes of Weibo short video, 1 hour of Wi-Fi surfing, a total of 2 hours)
The battery life is average, mainly because the base power consumption of the screen is higher.
In the same environment, after 20 minutes of "Peace Elite" HDR HD + extreme frame rate + anti-aliasing, the highest temperature is 38.9 degrees.
The heat is concentrated near the bezel under the camera, and the holding area on both sides is at the 33-degree level, which behaves normally.
Because the performance scheduling is very active, the SoC area will heat up relatively quickly, but unless you have to take it the other way around, there is no chance to contact the heat source.
Charge test, 1% start.
Redmi Pad Pro's 10,000mAh battery + iPad-level 33W fast charging (56.7 days on full standby), peak power of 26.4W, 100% display in 2 hours and 2 minutes, and 2 hours and 24 minutes of intermittent charging.
summary
The Redmi Pad Pro is a typical audio-visual tablet, with a 12.1-inch 120Hz LCD screen at its core, and four speakers that are OK. After the Pro version boosted the performance to the Snapdragon 778G level, it also gave the official keyboard (it would be better if you had a trackpad) and a stylus.
If the 6+128 version is 1499 yuan (5G version is 1999 yuan), the 8+128 version is 1599 yuan, and the 8+256 version is 1799 yuan (5G version is 2399 yuan) The pricing needs 618 yuan, then the Harry Potter version of the cliff that sells 2299 yuan (8+256) is a work of conscience (1799's tablet + 299's stylus + 89 protective case = 2187 yuan.) A lot more customized stuff, and the result is only 112 yuan more expensive than the regular version).
Unfortunately, the Harry Potter version is out of stock......