The low-temperature magnetization furnace is a powerful tool to reduce domestic waste and improve the living environment. Teach you how to deal with the combustion problem of low-temperature magnetizer in seven steps:
Step 1: Descale the furnace wall. After the fire is turned off and the temperature is cooled, the administrator climbs into the furnace from the furnace mouth and scrapes off all the dirt on the inner wall with a hoe and shovel to ensure that the furnace is relatively clean.
Step 2: Leak-proof through the net. In view of the large spontaneous combustion incinerator with large gaps in the diaphragm, 3-4 steel pipes with a diameter of 10 cm are vertically pierced into the bottom of the furnace to block the unincinerated garbage, and only allow the furnace ash and small volume of garbage to leak.
Step 3: Ventilation in the furnace. In view of the fact that after the incinerator is turned off, there are many accumulations in the furnace, and 3-4 "eyes" are poked vertically from the furnace to the bottom with an iron rod to make the ash leak and the air can circulate smoothly.
Step 4: Bottom slag removal. A hoe and shovel are used to shovel the ash deposited at the bottom of the furnace and the leaking garbage residue to the outside of the furnace. Do how much you leak and how much you shovel to ensure that there is a satisfactory incineration space and empty passage at the bottom of the furnace.
Step 5: Burn at the bottom of the furnace. Take local materials, pick up the rotten furniture, rotten shoes and other flammable materials that can be seen everywhere in the garbage dump and stack them at the bottom of the furnace in an orderly manner according to the requirements of ventilation and flammability, pour diesel fuel or waste engine oil for incineration, and incinerate the garbage at the bottom of the grid.
Step 6: Add fire to the furnace. After the fire at the bottom of the furnace is ignited, some dry and flammable garbage is shoveled into the furnace from the furnace mouth to ensure that the combustibles in the furnace are sufficient, so that the furnace temperature rises rapidly.
Step 7: Heat at the bottom of the furnace. At the bottom of the furnace at any time to participate in combustible, flammable, and at any time to clean up the ash, to ensure that the bottom of the furnace is burned for more than 10 hours, the furnace temperature can reach more than 500 °C, and the spontaneous combustion of garbage in the furnace is completed.