I believe that many friends have encountered various restrictions when installing third-party applications on TV,All kinds of can't be installed。 Today, I will introduce you to a method that is supported by most Android devices.
Most of the Android devices mentioned here are not limited to TVs, including projectors, boxes, mobile phones, tablets, and even Android car machines.
The approximate steps are to turn on the ADB debugging function of the device, and then connect to ADB through the Beetle ADB assistant (Android phone only) TV happy assistant (PC), such a software tool, and then install third-party applications on the device.
I won't say much about the explanation of ADB functions here, you can search on the Internet to understand.
Today, I mainly collected some ways for you to open ADB on various brands of TVs,You can try it。
This method is collected on the Internet,Combined with some of my own experience summary,Not necessarily every TV can be used,For your reference,If it doesn't work,You can also search for some models of your TV on the Internet,See if you can find a way!
1. The ADB debugging method is enabled by default for Android devices
Settings -> About -> Version (8 consecutive clicks) to activate developer options-
Then - Settings --Developer Options --Turn on USB debugging
Second, the major brands of smart TV ADB debugging and opening methods
1. TCL TV Thunderbird TV
The remote control has no buttons
Enter Settings - > System - > System Information, press "Up", "Down", "Left", "Right" on the remote control in turn, you can see the adb switch pop up on the page, and set ADB to on.
Some system versions will have an error when installing the app, you can try to enter the following two commands under the adb shell
setprop persist.tcl.debug.installapk
setprop persist.tcl.installapk.enable The remote control has buttons
- After entering the TV, press the [Source] button of the remote control,Select [Analog Accept] in the pop-up window of TCL TV,Press the OK button of the remote control。
- Menu button of the remote control, select Settings, and then press the OK button of the remote control to enter the next step
- After going to the TV settings, select Display on the remote control, then move the focus to the right to the professional settings, and click OK to enter the next step
- Once you're in the Pro settings, use the remote control to move the cursor to the contrast level
- When the cursor moves to contrast, immediately press the number keys on the remote control to 1950, and then you can open the factory menu hidden by the TV
- After entering the factory menu, move the focus of the remote control to the Other column, press the OK button of the remote control, and enter the Other setting page
- Find the ADB option, move the focus to this bar, and press the left and right arrow keys to open ADB debugging mode 3
2. Micro Whale TV
The remote control has no buttons
Settings -> Security -> ADB debugs
3. LETV TV
The remote control has buttons
信号源 -> 1 ->4 -> 7
4. Mi TV / Redmi TV
The remote control has no buttons
Settings ->About the Mac--Find "Product Model"--(8 consecutive clicks) Activate Developer Options-
Then --Account & Security -> ADB debugging (this option must be turned on every time you boot up)
5. Cool open TV
- The remote control has no buttons
- Press and hold the remote control menu button or set it from the navigation bar
- Go to System Settings, Machine Information
- On this screen, use the remote control to slowly enter "up, down, down, left, right" in order to enter the factory menu
- General Settings -> ADB switch
6. KONKA
- Select Analog TV as a source - > menu key + press 2008
- Other options -> Turn on adb root privileges
- Other method 1: Press the menu button, and the normal function setting menu will pop up. At this time, tap 5 times in a row"Replay"button,You can open the Konka TV factory mode menu。
- Other method 2: 42K1, 42K1T, 42K1Y, 42K1TY, 55K1, 55K1T models use this method: the ADB switch can be turned on in the advanced settings of the factory menu, and the password "123456" can be entered.
- For the 40K1Y, 49K1Y, and 49K1C models, there is an "Adbd Enable" option in other settings in the factory menu, and the following parameters can be modified to 1.
- For the 40U1 and 58U1 models, there is no ADB-related option in the factory menu, but it is said that it will open automatically after upgrading the firmware.
7. Changhong TV
1. The remote control has numeric keys
(1)、Switch the TV to {TV mode},
(2) Press the [Menu Key] to open the "Settings" menu.
(3) Then select "Menu" → "Story Mode" → "Standard Mode".
(4) Press the four buttons of the remote control [0], [8], [1], [6] in turn to enter the factory mode.
2. There are no number keys on the remote control
(1)、Switch the TV to {TV mode},
(2) Press the [Menu Key] to open the "Settings" menu.
(3) Then select "Menu" → "Story Mode" → "Standard Mode".
(4) Then press the [Up] [Right] [Right] button of the remote control in turn, and the on-screen keyboard will pop up in the lower right corner.
(5) Use the remote control to select the on-screen keyboard [0] [8] [1] [6] to enter the factory mode.
8. Hisense TV
- Method 1: In My App -> VIDAA Assistant -> Settings -> TV Debugging Authorization
- Method 2: Settings -> sound -> volume balance -> press the number key "1969"
- Method 3: Settings -> sound -> volume balance -> press the number key "1969" -> enter factory mode -> Tofac from U to M mode -> shutdown and restart -> open settings -> about -> machine information -> press the "Menu" key four times in a row - five times in a row to open the hidden native settings -> find the version number and press the confirm key in a row to enter developer mode - > find and enter developer mode - > turn on "USB modulation"
- Some of the ones without the number keys are in the settings -> sound -> volume balance and then press back and forth "Menu" + "Confirm" to enter factory mode.
- There are also some remote controls that have "red, green, yellow, and blue" keys, which are pressed sequentially at the sound balance to enter the factory mode.
- (There are also some models if you can't enter the factory mode, directly open the settings -> about -> the machine information -> press the "menu" key four or five times in a row to open the hidden native settings - > find the version number and press the confirm key continuously to enter the developer mode - > find and enter the developer mode - > turn on the "USB modulation")
Hisense TV is more complicated,Different system versions may be different,Everyone has to try more。
9.Sony TV
Open Settings on the home page of Sony TV,Then select [Security & Restrictions], turn on [Unknown Sources], and turn on [ADB debugging] in [Developer Options].
10. Philips TV
- First go to "Settings" - click on "Local Info";
- Use the arrow keys of the remote control to type "up, down, down, left, right", note: not "up, down, down, left, left, right";
- Enter "Factory Mode" and select "Advanced Settings";
- Then you will be prompted to enter the password, note: TV model: 42K1, 42K1T, 42K1Y, 42K1TY, 55K1, 55K1T factory menu advanced settings can turn on the ADB switch, enter the password "123456" to enter, TV model: 40K1Y, 49K1Y, 49K1C factory menu other settings have a "Adbd Enable", the following parameters can be modified to 1;
- When you're done, select "ADB Switch" and turn it on to install third-party references.
11. Skyworth TV
- Enter Factory Mode: Find "This Unit Information" in the "Settings" menu of your TV.
- Use the remote control arrow keys to enter "up, down, down, left, right" to turn on factory mode. In factory mode, select Advanced Settings. Find "ADB Switch" in "Advanced Settings" and set it to "On". (For some models, if prompted to enter the password, it is: 123456)