Chips are the mainstay of modern science and technology, and they are absolutely indispensable, otherwise many high-tech products of human beings will be paralyzed instantly.
You must know that whether it is electric vehicles, mobile phones, computers and other technological products, they are all driven by chips, and obviously chips are the heart of these technological products.
If you want to make chips, you need to use an advanced equipment - a lithography machine.
In the past, the mainland could not produce chips on its own, and relied on importing chips from other countries.
The reason why this is so is because the mainland did not have lithography machines at that time, which is why the mainland has been importing lithography machines from the Netherlands and other countries for a long time.
The United States has been trying every means to hinder the development of the mainland, and in recent years, seeing the rapid development of chips on the mainland, the United States has been frightened and began to do things.
In order to prevent the mainland from continuing to take off in the field of chips, the United States actually ordered the Netherlands, Japan and other countries to prohibit the sale of high-end chips such as lithography machines to the mainland.
This also reminds the mainland that it is necessary to independently develop chips so that it will not be stuck by the United States, and creating a lithography machine is the top priority.
So what does it mean to build a lithography machine with the power of one country? It may become the leader of the fourth industrial revolution.
1. How important is the lithography machine?
Chips are extremely important in modern industry, and if you want to make chips, you can't do without high-end equipment such as "lithography machines".
Lithography machines, also known as mask alignment exposure machines, are used in the lithography process in chip production.
The lithography process is one of the most important steps in the production process, which is why a lithography machine is used in the development of chips.
The precise size of the chip is determined by the lithography machine, and after the designer designs the chip circuit, the circuit is engraved on the chip with a lithography machine, and the size is generally above the micron level.
The lithography machine is one of the most expensive pieces of equipment in chip production, and it plays a decisive role in the frame and function of the chip.
In fact, it is not difficult to produce high-precision chips, but the chip production speed is not fast enough with other equipment.
But as long as you use a lithography machine, you can quickly produce high-precision chips, which is why lithography machines are so important.
Second, the mainland has been able to build a lithography machine
Many years ago, the mainland's strength was still very weak, and in particular, its scientific and technological strength was far from being comparable to that of the developed countries in the West.
At that time, it was extremely difficult for us to manufacture a chip, which made the mainland have to import chips from other countries all the time.
It is precisely because the mainland cannot be self-sufficient that it always depends on the face of other countries, and for many years foreign countries have also carried out a "blockade" on the mainland in the field of semiconductors.
At that time, the experts of the Dutch lithography machine also ridiculed us: even if you give the mainland a drawing, you can't build a lithography machine!
It is enough to see that the situation of the mainland in the past was very difficult, but the mainland was not afraid or discouraged, but worked hard to change the bad situation as soon as possible.
In recent years, the mainland has finally made a major breakthrough in the field of chips, and the development speed of chips is getting faster and faster.
The United States has always regarded the mainland as one of its biggest enemies, and has constantly suppressed the mainland to curb its development, especially in the field of chips.
The United States is well aware that lithography machines must be used in the manufacture of chips, so the United States wants to prevent the mainland from importing lithography machines.
The U.S. government has repeatedly forced the Dutch government and ASML, a leading chip manufacturer, not to export lithography machines to the mainland.
At first, the Dutch side was firmly opposed to the death, but then the United States continued to exert pressure, and finally forced the Netherlands to obey the orders of the United States.
The United States thought that this would prevent the mainland from continuing to flourish in the field of chips, and at the beginning, this move by the United States did cause great trouble to the mainland.
After all, the mainland did not have the ability to manufacture lithography machines at that time, but the United States seems to have underestimated the confidence and ability of the mainland, knowing that the mainland has always been a country that has the courage to create myths.
After that, the mainland riveted enough to make up for the shortcomings, and now the development of the mainland in the field of lithography machine has finally made rapid progress.
Dutch experts in the field of lithography machines are now also impressed by the mainland, after all, the era when the mainland could not build lithography machines has long been a thing of the past.
Now that the mainland is finally self-sufficient instead of importing Dutch lithography machines as it has always done, it also shows that the US conspiracy has failed again.
From then on, the mainland will no longer have to look at other people's faces, and the United States should not continue to embarrass the mainland in the field of lithography machines.
荷兰光刻机巨头阿斯麦见到大陆发展神速也不禁感慨：阻碍中国的发展是最错误的选择，越是阻碍中国发展，中国反而会发展得越快。
Indeed, the mainland has gone all the way from the era of poverty and whiteness, broken through all kinds of difficulties and obstacles, and now has even transformed into a scientific and technological power.
Now that the mainland is fully fledged, it is futile to allow the United States to continue to do things.
However, the mainland will not be satisfied with the brilliant achievements of the present, and the mainland will continue to gallop forward in the field of science and technology, especially in the field of lithography machines.
Speaking of which, the United States' development in this field is not as good as that of the mainland, which means that as long as we develop at full speed, we can further distance ourselves, and the United States can only look at the ocean and sigh at that time.
3. Why has the mainland made remarkable achievements?
The mainland has always been able to start from scratch, and in the past, the mainland could not build lithography machines, which also shows that the number of domestic lithography machines in the mainland at that time was 0.
Many years later, the mainland has now made a breakthrough in the high-tech field and has begun to have the ability to build lithography machines, knowing that there are only a handful of countries that can build lithography machines on their own.
Why the mainland has made remarkable achievements is mainly related to the following three reasons.
1. Strong scientific and technological strength and innovation ability
The mainland's scientific and technological strength and innovation ability are very strong, so as to help the mainland build lithography machines.
For a long time, the mainland has been pursuing independent innovation and striving to improve its scientific and technological strength. Today, the mainland's scientific and technological strength is becoming stronger and stronger, and its ability to innovate is also getting stronger and stronger.
In this context, it is no longer difficult to manufacture lithography machines, and the mainland will definitely continue to increase its efforts to carry out scientific and technological innovation in the future.
2. The mainland has strong economic strength
The mainland's strong economic strength is also one of the key factors that can make breakthroughs in the field of lithography machines.
Continent's R&D investment in the field of lithography machines is very huge, how can Continental do this without strong economic strength as support?
High-tech products have always been linked to the economy, after all, if you want to successfully develop a variety of high-tech products, it is very money-burning, and only with money can scientific and technological research and development be guaranteed, otherwise everything is empty talk.
The reason why the United States was able to become the most powerful country in the world in science and technology many years ago is mainly because of its strong economic strength.
In the future, if the mainland wants to mass-produce lithography machines, it will definitely have to invest more money, and the mainland's economy is still in the stage of rapid development, so there is no need to worry about the problem of insufficient funds.
3. The mainland has a strong industrial system
The production and R&D of lithography machines are also inseparable from the industrial system, and the mainland now has a strong industrial system to successfully build lithography machines.
This system can play a vital role in the future mass production of lithography machines, so it should not be underestimated.
At present, the industrial systems of all countries in the world cannot be compared with those of the mainland, and the industrial system that is as strong as the United States has long been declining.
Fourth, the mainland may become a leader
The mainland government has already proposed "Made in China 2025" and listed lithography machines as a key breakthrough area.
Continental has also been working towards this goal, and now it has finally come true, and Continental has independently developed a new lithography machine.
What is even more gratifying is that the mainland has made a new major breakthrough in the field of lithography machine and developed new core equipment.
As long as the lithography machine made by the mainland makes a shining debut, it is no longer a dream to achieve mass production in the future.
If the mainland can really achieve mass production of lithography machines, it will mark that the mainland has found a broad road to the next generation of scientific and technological revolution, and the mainland will also become the leader of the fourth industrial revolution.
In this new revolution, the mainland's high-tech products will also continue to increase.
Lithography machines have played a vital role in this revolution, and under its promotion, various advanced technologies such as artificial intelligence and unmanned aerial vehicles (UAVs) in the mainland are expected to be qualitatively improved and developed at a high speed.
In this way, the mainland's scientific and technological level can also be raised to a higher level.
At present, the mainland already has extremely strong scientific and technological strength, and if the mainland takes the lead in the next industrial revolution, it will be able to better deal with the threat of the United States.
The United States is afraid of the rapid rise of the mainland, and especially likes to pull many allies in the field of science and technology to encircle the mainland, in a vain attempt to hinder the mainland's rapid development of science and technology.
Over the past few years, the mainland has withstood one US attack after another, but the mainland has always been in a situation of passively accepting attacks.
As long as the mainland is far ahead in the fourth industrial revolution in the future, it will be able to seize the initiative and become the party that takes the initiative.
At that time, on the contrary, the United States will become a passive party, and it will be difficult for the United States to continue to make things difficult for the mainland.
epilogue
In the past, other countries and some experts often deliberately sneered at the mainland, and they even bluntly stated that China could not build a lithography machine.
This was indeed the case back then, after all, the mainland at that time was very backward in all aspects of strength, far from catching up with the developed countries of the West.
The lithography machine is a very high-end equipment, and the scientific and technological strength of the mainland at that time was not enough to manufacture it.
This situation also lasted for a long time, and the mainland had to import lithography machines from the Netherlands every year to meet its own needs.
In the face of ridicule and contempt from other countries, the mainland has not lost its fighting spirit and confidence, but has mustered all its vigor and gone all out for development.
In recent years, Continental has achieved breakthroughs in the field of high-tech, and now Continental has the ability to independently develop lithography machines.
So what does it mean to build a lithography machine with the power of one country? It is very likely to become the leader of the fourth industrial revolution.
As long as the mainland continues to make persistent efforts to improve the ability to manufacture and develop lithography machines and truly achieve mass production, the future of the mainland will be infinitely bright!
So what do you think that independent research and development of lithography machines is expected to become the leader of the next industrial revolution?