The days are flying fast, it is almost the end of the year, and many owners have also got their own houses at the end of the year, and can't wait to decorate and live in it before the New Year. Although I don't want to ruin everyone's good interest, as the person in charge, I still have to remind everyone: Is the acceptance of the new house done? Did all the inspections pass?
Therefore, it is useless to be anxious, we have to do a good job of new house acceptance first, lay a good foundation, and then after the decoration is completed, there will not be too many problems, and we can't find someone to be responsible.
So, what is the process of receiving the renovation inspection? What do we need to check? The editor will give you one by one.
Next, there are 8 specific home inspection details, each of which is very important, and must ensure that it is fully qualified to carry out the following renovation work.
(Mini programs have been added here, please go to Toutiao client to view)
First, the first thing to do when entering the door: check the doors and windows!
1. Remember to take protective measures before the decoration of doors and windows, which may accidentally cause damage or stain during decoration.
Second, the wall cracks
1. Check whether there are cracks on both sides of the balcony. The walls on both sides of the balcony are load-bearing walls, if you find a crack, you must contact the property immediately, if you do not pay attention to it, it may collapse in the future, endangering others.
Third, the wall is empty
1. You can use a small hammer to gently tap the wall, if the empty drum does not exceed 2㎡ then there is no problem, if it exceeds 2㎡, you have to find the property to solve the problem.
4. Floor drain
1. Do the closed water test first, and then do the flushing test, so that you can check the waterproof effect and the slope of the floor drain, only to ensure that the floor drain is at the lowest part of the ground, in order to let the stagnant water discharge quickly.
5. Roof
1. Use the ruler and wedge feeler gauge to detect the flatness and verticality of the roof, and the error should be less than 4mm. Of course, if the error is not large, you can choose to adjust the remedy when making suspended ceilings and flooring.
6. Equipotential terminal box
7. Weak current box
8. Distribution box
1. Check whether the leakage protector in the house can operate normally.
2. Check whether the empty open can operate normally, the empty open directly affects the safety of electricity at home, and cannot be sloppy.