In the summer when the temperature continues to rise, if the mobile phone plays large games for a long time will have obvious heating and frame drops, etc., then the corresponding equipment is needed to assist in cooling the mobile phone, and the heat generated by the core is quickly dissipated out, Beitong ICE mobile phone radiator adopts magnetic fixed design, can be directly adsorbed to the back of the mobile phone, built-in large-area semiconductor refrigeration sheet, the peak power of operation reaches 20W, and then test it in detail to see how the actual cooling effect is.
This unpacking process is directly skipped, the packaging box contains Beitong ICE mobile phone radiator, a strong tile and a power supply line, only a small number of models are equipped with magnetic function, the strong tile is very thin, does not affect the grip and use of the mobile phone at all, the surface uses magic array pattern design as decoration, the back is pasted glue can be adapted to most models.
The shell of the mobile phone radiator is made of plastic, using titanium steel gray color design, the middle of the fuselage is a hollow air inlet, and the surface has a metal dust protection filter design, effectively designed above the brand logo of Beitong, the outside of the air inlet is RGB lighting, built-in 16 RGB lamp beads, can display a variety of different colors, support three different dynamic lighting effects.
Two physical buttons are designed under the front of the fuselage, the left side is the lighting adjustment button, the right side is the running gear control button, by clicking the light adjustment button to turn off the lights or cycle to switch different lighting effect modes, the mobile phone radiator provides three operating gears adjustable, when connected to the power need to click the gear control button to start the radiator.
The diameter of the mobile phone radiator is 62mm, the thickness is 30mm, the weight is 110g, the side of the fuselage is a circle of air outlets, from the side can be seen the internal heat dissipation aluminum column, the actual air volume blowing to the fingers is very small, the surface of the internal aluminum column is painted blue, the edge is treated by the rounding process, and there is no such raised burr or scraping feeling, and it is relatively smooth in the feel.
The bottom of the fuselage is a USB-C power input interface, the operating power of the radiator can reach 20W, the measured output of 5V/2A charger can also power it, the fan and lighting effects can operate normally, but the actual cooling effect is better than nothing, so it is recommended to use it with a charger or mobile power with an output power of 20W or more that supports PD fast charging protocol.
The bottom of the fuselage is covered with a thermal conductive silicone pad, the surface is smooth and delicate and soft to the touch, and the mobile phone radiator has a built-in 40×40mm large-size semiconductor refrigeration sheet with a power of 20W, and uses thermal conductive gel to fill the gap between the refrigeration sheet and the thermally conductive silicone pad, so that the conduction efficiency is higher, and the high-speed fan and the heat dissipation aluminum column quickly export heat.
The manufacturer said that the peak power of the mobile phone radiator can reach 20W, using the power meter to test, the operating power in the high-end state reaches 19.4W, showing that the current PD3.0 fast charging protocol is used, and the power is still above 19W after half an hour of continuous operation, and the operating power will be reduced to 16W if it is in the mid-range state.
After fifteen minutes of no-load operation, the infrared thermometer was used to measure the surface, the measured surface temperature was 7.2 °C, the ambient temperature was 32 °C at the time of the test, and there was no cooling appliances such as air conditioning fans, the cooling range was close to 25 °C, although it did not achieve the manufacturer's nominal 35 °C cooling range, but for a 20W mobile phone radiator is quite good.
If the mobile phone itself is equipped with magnetic function, then there is no need to install the included strong tile piece, such as the iPhone 12/13/14 series of mobile phones, which can directly absorb the radiator to the corresponding position on the back of the mobile phone, and the Android platform is only a few models equipped with magnetic function, such as this Meizu 20 mobile phone needs a strong tile to assist in fixing the radiator.
Common back clip fixing methods have installation restrictions, such as the width of the fuselage exceeds a certain value can not be installed and used, and magnetic fixation has an incomparable advantage, that is, the installation flexibility is strong, can ignore the width of the fuselage of mobile devices, can be installed on tablets and other devices, directly install the radiator on the corresponding heating position.
When installing, try to be as close to the motherboard side, the closer to the heat source, the better the heat dissipation efficiency, the magnetic attraction of the mobile phone radiator is quite strong, can firmly suck the mobile phone and positioning is very accurate, the wire material dragging will not shift, even if the handheld radiator shakes the phone at will will not fall off, to know that the weight of this mobile phone is more than 200g, do not worry about slipping.
The first game tested is "Peace Elite", the game screen is set to HDR HD picture quality mode, and the game frame rate is set to extreme (60FPS), the anti-aliasing effect is turned on, and the game frame rate reaches 60FPS when measured with the mobile phone radiator, and the frame rate of the entire game process is very stable, even if the driving map and other scenes do not fluctuate.
Even if you do not turn on the mobile phone radiator has little impact on the game frame rate, on the one hand, because the performance of the Snapdragon 8Gen2 chip is strong enough and the heat is low, on the other hand, the performance requirements of the "Peace Elite" game are not harsh, if the performance is one level weak and the heat generation is high, such as the Snapdragon 888 or Snapdragon 870 and other chips, it is more dependent on the assistance of the radiator, otherwise when encountering the driving running map, there will be frame lag and so on.
"Genshin" has higher requirements for hardware performance, which means that the heat of the mobile phone is greater, in the game the picture quality is set to the preset extremely high mode, and the game frame rate is manually changed to 60 frames, the motion blur is set to very high, the game scene is near Liyue City, advancing in the direction of Meru City, the main game content is to run the map to open the land and fight monsters to open the box.
The mobile phone in the natural heat dissipation state, due to the early update of data and loading data, when entering the game after less than a minute of CPU began to reduce the frequency, X3 large core frequency dropped to about 1.7GHz, the impact on the stability of the game frame rate is very obvious, although the game scene can reach 60FPS, but when running the map or releasing the skill, there will be lag frame drop.
When used with Beitong ICE mobile phone radiator for gaming, the mobile phone in most scenes of "Genshin" game frame rate reaches 60FPS, the whole game CPU frequency has not overheated and reduced, X3 large core frequency can even reach 3.2GHz full frequency operation, and is very active in core scheduling, fully releasing the performance of the Snapdragon 8Gen2 chip.
Overall Review:
Beitong ICE mobile phone radiator shape design is very pleasing, size and weight control is very in place, occupying less position and will not significantly increase the burden on the wrist, add a circle of cool RGB lights on the shell, RGB dynamic lighting effect can indeed make the appearance become flexible, while playing a certain role in setting the game atmosphere, mobile phone radiator with magnetic fixed design, no size specification restrictions can be installed on mobile devices such as mobile phones and tablets, its own adsorption force is strong, even if it shakes and pulls at will, it will not fall off.
The mobile phone radiator is equipped with a large-area semiconductor refrigeration sheet with a peak power of 20W, with a large air volume cooling fan and a heat dissipation aluminum column, quickly taking away the internal heat, the actual cooling performance is quite excellent, the cooling speed is fast and the opening feels cold, so that the hardware performance is completely released, in the "Genshin" game to maintain full frame running without stuttering, for gamers, smooth and stable pictures can achieve a certain combat power bonus, three running gears can be switched according to different game scenarios, Even when running in the upper range, the noise is low, which does not affect the immersion of the game at all.
【New】Beitong ICE magnetic mobile phone radiator chicken cooling artifact suitable for Apple One Plus Red Devil Xiaomi semiconductor back clip Black Shark 2pro silent refrigeration wind game fan play ¥269 purchase