laitimes

Introduction to the smart construction site edge protection radar

author:Regimi Smart Site
Introduction to the smart construction site edge protection radar

First, the product overview

This edge protection radar is mainly used in the construction site, the use of mature lidar human body sensing technology, in the detection of the human body through, can be the first time to issue a voice, but also according to different occasions, at any time to replace different voices, to achieve different playback effects, it is not affected by temperature, humidity, noise, airflow, dust, light, etc., suitable for harsh environments.

Second, installation and use

1. Fixation of equipment

The equipment adopts vertical installation, and there are corresponding mounting holes at the bottom of the outer box, and the specific dimensions are as follows:

Introduction to the smart construction site edge protection radar

Height: 1370mm Base: Length 420 X Width 420 X Height 245mm Tips: Data is measured in the product max width, and there is an error in manual measurement

2. Equipment details

Introduction to the smart construction site edge protection radar

Device appearance

Introduction to the smart construction site edge protection radar

Alarm lights

Introduction to the smart construction site edge protection radar

Camera

Introduction to the smart construction site edge protection radar

Boom + monitoring radar

Introduction to the smart construction site edge protection radar

Base LOGO+ device switch

3. Equipment operation

(1) Open the equipment general switch, after the equipment self-test is normal, it will broadcast that the Jimmy boundary protection system is starting, the Jimmy perimeter protection system is successfully started, and the working status light strip shows a green light;

(2) Trigger the alarm, the working status light strip displays a red light, and accompanied by the alarm tone (default: danger ahead, please leave quickly) broadcast and capture pictures, the alarm data will be uploaded to the smart construction site cloud platform;

(3) If the device is not networked, the working status light strip shows yellow light; Trigger the alarm strip to display a red light, after the alarm tone is played, the light strip will light a green light (monitoring the status of networking), monitoring to no network, the light strip shows a yellow light;

Third, the technical parameters of the equipment

1 Whole machine parameters

l Supply voltage: 220V AC;

l Power consumption: not more than 200W;

l Lithium battery: 12V 60Ah;

l Continuous battery life: more than 24 hours;

l Installation mode: vertical;

l Shell size: height: 1370mm Base: length 420 X width 420 X height 245mm

2 Camera parameters

l 1/2.7" Progressive Scan CMOS;

l 2560 × 1440 @ 25 fps;

l 0.005 Lux @ (F1.2,AGC ON), 0 Lux with IR;

l H.264, Smart264, H.265, Smart265;

l 120 dB WH, Backlight Compensation, Fog Transparency, 3D Digital Noise Reduction;

l Intelligent detection: cross-border detection, area intrusion detection;

3 Radar parameters

l 量程:0.1m-100m;

l Field of view: 0.5°;

l 帧率:1Hz-1000Hz;

l Communication interface: UART/CAN/485/232

l Working temperature: -25°—60°

Read on