The basic shaft body of Jiadalong, the G PRO series, ushered in a new iterative upgrade a while ago. From the earliest G axis, to the self-lubricating G PRO series, at the same time, with its close price to the people, and a fairly smooth hand performance, it has become one of the first choices for many players to get started, and the representative of cost performance. Now, the new G PRO 2.0 has been upgraded for the mold, such as the addition of a condenser, and the continuation of the original G PRO series of iconic self-lubrication schemes, which not only ensures the feel but also improves the light transmission performance of the shaft body.
As the basic shaft body, the color scheme has not changed, and the axis can be easily distinguished by color (feel). The contrast between the old and the new, although they are all transparent covers, are actually different. G PRO 2.0 cover high transparency, high glossy side, light transmission brightness will also be higher, while the old G PRO has a slight matte surface, the contrast is not so bright. In short, the new version looks obviously crystal clear. In addition, the biggest upgrade point of G PRO 2.0 is to switch to the condenser scheme, the raised lens height is relatively short, for the keycap compatibility will be better, basically do not have to worry about the card key problem. In terms of details, it adopts an integrated structure, which is composed of a condenser and a light guide column, and is not fully extended to the end, so it is still compatible with the front-line lamp.
Under the new condenser scheme, the lighting effect is better in addition. Like the previous version of this openwork lamp position upper cover, when the shaft body is stuck tightly and needs to be vigorously miracle, it will dry out the upper cover frame if you are not careful. On the G PRO 2.0 shaft body, there is no such case.
Second, continue the traditional art of factory self-lubrication. Among them, the amount of lubrication feels more restrained than before, but compared to the shaft body of the same price, this amount of oil is quite a lot, so its smoothness and noise control are still very good, and there is no spring and shrapnel noise at all. In addition, the use of gold-plated contact shrapnel, the shaft life of the nominal reached 80 million times. The stitches seem to be a little harder than before, of course, they are still in the softer category. There is also an important change, such as the G red PRO 2.0 on the hand, although it is still 45g trigger, but it uses the popular long spring scheme, the rebound feel is stronger, more followed, and the button sound is also a little louder. As for the shaft core shaking, the difference with the old version is not very large, in this regard, the G Silver PRO with the walled cross shaft core has an advantage, of course, it is also a little more expensive.
Overall, the G.T. G PRO 2.0 shaft body, the feel of the hand performance is still excellent at this price point, especially the smoothness, and noise control. The second is the improvement of the light effect, if it is a hovering keyboard, the new upper cover will look more shiny.