Decoration is a system engineering, each type of work, each process, all kinds of processes, all kinds of materials, in a short period of time, all have to enter the site, construction, and finally delivered to the owner, is a complete living space.
Since it is a system and a project, it must not be independent between the various links. Just like stir-frying, the dish is not delicious, it may be that the heat is too high, the oil temperature is high, the salt is too much, or the ingredients are not good, or it may even be that the pot is too new and the chef is too tender. If you don't do a good job, the last thing in front of you can't be a delicious dish.
Many people see the renderings beautifully, see the extraordinary tone in the custom furniture store, see the sample cabinet tightly sewn, see the details are amazing, so fluttering thought, as long as I spend money to set a cabinet in this house, then to my home must be so beautiful.
Wake up, Iron, it's time to get up and do PPT!
The base of your home is not worthy of the custom furniture you spent a lot of money on.
First of all, to show you a thing, when Cao Datou opened a store before, a paragraph in the custom contract:
This is our basic method of throwing pots. No matter what kind of installation site you encounter, but if you don't install it well, take this out and at least half of the pot can be successfully thrown.
"Uneven?" "Not at the grassroots level"
"There's a seam?" "Not at the grassroots level"
"Can't fit in?" "Not at the grassroots level"
"The hanging cabinet fell?" "Not at the grassroots level"
"Grassroots is not OK", these four words, comparable to the straight male world of "drink more hot water", omnipotent.
And most of the customers can only silently tolerate, he does not understand what the grassroots should look like.
Cao Datou will take you to study it.
It is important to pay attention to the words horizontal, vertical, and wall quality first. The so-called difference of a thousand miles is fully revealed at the time of installation. For example, a yin angle as shown in the figure, if the angle is not just 90 degrees, then the cabinet in the installation, can not be close to the wall surface to install flat, the side panel and the wall will have a large gap - I have encountered a family before, the wall is oblique, the gap between the back plate of the cabinet and the wall surface reaches 4 cm; there is a wavy more interesting, the wall is bow-shaped, the cabinet is installed, there is no seam in the middle, there are 3 cm slits up and down,
Does it feel good to look that way?
Look up, OMG
How to install cabinets on this curved wall.
Maybe you think the gap is okay, at most it's not very good, it's a big deal to block it with a side panel. So what if this is a hanging cabinet installed with expansion screws or hanging codes? The gap means that the expansion nail cannot fit completely, and the force is very unstable, in case something goes wrong... It will kill people.
It is not uncommon for hanging cabinets to fall off
What if the tile wall of the kitchen is uneven? That is more troublesome, the standard rectangular countertop, the site is difficult to process, 80% need the cabinet factory / countertop factory to send people to the scene to loft, change the goods, spend a lot of money, delay a lot of time.
This kind of wall, how do you install the countertop
What if the top surface is uneven? If there is a partial ceiling, or a flat roof, it may be solved by closing it with the yin angle line.
Some wardrobes are designed with a top line or a closing panel, and the installation master re-polishes it according to the slope of the top surface, and then barely installs it.
What about the door to the top? Did you saw off a corner of the door panel?
There is also a problem, in the process of polishing, the finish/paint will be broken, peeled off, light edges will be destroyed, heavy then the entire door will have to go back to redo - this money, decoration companies and custom merchants will not recognize, only you can go out.
The top surface is uneven and there are seams on it
There is also the problem of walls. Nowadays, many homes will arrange some hanging cabinets in order to have more storage space. The installation of the hanging cabinet is fixed by the wall, and the most common method is to punch the expansion screw or the hanging code. However, when many homes change water and electricity, the wall grooves and buries the line, as well as the developer's buried pipeline, which leaves a huge hidden danger to the installation of the hanging cabinet - in case the electric hammer breaks the pipeline when it is expanded, this is not something that can be handled casually.
Imagine if the electric hammer broke the conduit... That's really holding an electric drill to shake the wire, all the way to the spark with lightning
There are also some walls made of hollow bricks, which do not have the ability to bear weight, even if they are barely installed at that time, it is difficult to ensure that there will be no problems in the future long-term use. As for the lightweight partition wall of the plasterboard structure, the woodworking board partition is this, and it looks like a wall on the outside, but at most it can only hang a TV set, and it is a fantasy to install a cabinet. (It's not impossible, there are ultra-long expansion screws specifically for this wall, which is quite expensive)
conclusion:
Please don't think that custom furniture is a panacea, this is just a link in your entire decoration, it can not exist in isolation, to match the wall, wall, top, floor, skirting board, doors, door covers and so on.
Therefore, for the completion of your entire decoration and the quality of the final presentation, please be sure to have strict requirements for each type of work in the base installation process, at least horizontal and vertical, yin and yang ninety (90 degree angle).
At each important acceptance node, such as the completion of hydropower transformation, the completion of brick laying, the completion of wall painting, etc., please be sure to be present and strictly inspected.
There are also a few magic weapons when checking, 2 meters long ruler you should always have one, if there is really no, you go to the slag pool to pick up a skirting board, an aluminum profile, can be used.
In addition, in hydropower renovation projects, it is best to take photos at any time to record the location, direction, node, etc. of the pipeline. This is to prevent the installation master from accidentally hitting the pipe when opening a hole in the wall.
There is also a point to pay attention to, after the custom furniture installation is completed, please pay attention to the protection, conditionally lay the protective film. There may be a lot of dust in subsequent works, which can lead to poor use on hinges and slide rails.
After the water and electricity are finished, it is better to take a group of photos like this
Decoration regardless of customization, customized regardless of decoration, cabinet decoration is not good to rely on decoration, decoration effect is not good to rely on customization, even if it is the so-called assembly company, these two waves of business are also doing their own thing. And you, on the other hand, cannot be offended at either end.
Therefore, as a customer, you can only pay more attention to yourself.
I really want to scream at this industry.
bah.