We have talked about a variety of wireless technologies before, always mention the "throw off the shackles" and other adjectives, but the data can be transmitted wirelessly, the energy is almost meaningless, no power or have to connect the power, other than to say, the use of the need to move around the mouse, wireless after is really cool, forced to connect or see the battery power alarm is really lost. Is there a way to be completely free? In fact, there are also some, to understand the mouse wireless charging technology.
When it comes to wireless charging technology, the small partners who pay attention to mobile phones are probably not strangers for a long time, and the wireless charging board is very easy to use with mobile phones. This technology has been on the edge of popularization, the mouse will not be invisible, of course, there are, when not used to put on the side of the charging board, when you need to use it, you can even share a charging pad (or charging area) with the mobile phone, which is really good.
But...... Many small partners probably think this is a bit strange, after all, it still needs an area that needs to be charged statically, getting rid of the "reins" but needing to "go back to the bar" every day to sleep the mouse feels still unpleasant. Therefore, the technology that can be used while charging on the mouse pad was born, such as RAZER HyperFlux, which allows the mouse to be equipped with a supercapacitor and the electromagnetic induction of the mouse pad to achieve continuous power supply.
I don't know if you have noticed that the words "capacitance" and "electromagnetic induction" are not, many small partners may find the key problem after a little thought: want electromagnetic induction to generate electricity, and capacitors are not batteries, and can only maintain a short period of power supply. Yes, this collocation requires the mouse to move to have power supply, and it is really to move to "have electricity", and the capacitor can only support the power supply that everyone occasionally lifts the mouse for a while, so you want to switch to another mouse pad? No way!
It is not cool to charge only statically, but it seems to be a bit too much to have electricity when it can only be moved, so it can be charged both and statically, and the built-in battery allows the mouse to be used away from the charging pad. For example, Logitech POWERPLAY, it uses magnetic resonance charging, in addition to the above advantages, charging height is higher, you can add a thicker cushion on the charging mouse pad, players can choose according to their own feel.
In addition, the magnetic resonance power supply device is very small, so Logitech has designed a replaceable chassis. As long as the interface mouse is left in the counterweight warehouse, everyone can first buy the relatively low price of the "standard version", and then replace the counterweight warehouse cover with a POWERPLAY chassis, with the charging mouse pad, it will be upgraded to a wireless charging version.
In addition, some mice are still using a bit of an old so-called wireless charging technology, in fact, it is contact charging, the design concept and convenience are between the plug-in cable and Qi charging, the price is not low, and now the choice is actually meaningless.
The well-done "mixing monster" actually has it, that is, the wireless charging module. POWERPLAY mode has high requirements for mouse adaptation, what if the wireless charging module is directly plugged into the wired interface? Considering the use of wired charging, these interfaces are usually located in places that do not hinder the use, after plugging in, in addition to being a little ugly, it really has no impact on the use, the current module is mainly used to increase the Qi charging function, I hope that in the future there will be products suitable for logitech Razer and other wireless charging pads.