HyperX has released a wave of eye-catching peripherals at this year's CES, one of which is the HyperX Pulsefire Haste Wireless Whirlwind Wireless Gaming Mouse. As a wireless model of the HyperX Pulsefire Haste, the core configuration is almost copied from the wired version. However, after adding the battery module, the overall weight is still controlled at a rather stunning 61g, worthy of the title of "Ultra-LightWeight".
Originally HyperX swirling game mouse accessories are many, the wireless version is more exaggerated, in addition to the original anti-slip stickers and spare foot stickers, but also more wireless receiver extension module, like PC users can pull the wireless signal transceiver point closer, reduce mouse delay and improve signal stability.
Exterior details
Under the premise that the mold has not been changed, the shape of hyperX rotary wireless version is the same as that of the wired version, with a symmetrical design of left and right, a separate left and right button cover, and 6 programmable buttons. The upper cover has a large area of honeycomb holes, and there are also separate left and right button covers, but the fingertip contact surface is still a non-perforated concave surface. The upper cover and the left and right button covers, and there are high-light strips separated between the side skirts, which enhances the texture, but it is also one of the places where the mouse is more likely to accumulate dust.
The waist of the mouse side skirt is not obvious (the concave curvature of the left and right button covers is also not large), the reason is nothing more than to make it as convenient as possible to attach the non-slip side skirt to improve the overall control of the mouse, especially in grasping and lifting the mouse. HyperX Spinfire Wireless Gaming Mouse supports wired/2.4G dual-mode connection, unlike its own headphones that resolutely take the road of wireless, And The Spiral Wireless Edition supports punching while using, which can do emergency treatment.
So, apart from the switch from wired to keyline separation, what else has changed in appearance? The answer is that only the portion occupied by the USB receiver position remains the same. In addition, the nameplate is actually full of punches.
Usage experience
The product of HyperX's extreme lightweight concept is the 61g net weight of the Whirlwind Wireless Version, which is lighter than the official nominal 62g weight. But the strength of this mouse is also in the built-in 370mAh lithium battery, 2.4G mode can achieve 100 hours of battery life, as the same more than 100 hours of battery life peripheral products, belongs to the Cloud Alpha Wireless dream linkage! Although the battery continues to increase to achieve higher endurance, but increasing the weight is bound to go against the concept of lightweight, 61g should be the balance between endurance and weight.
124.3 * 66.8 * 38.2mm, mainstream high back type specifications, almost no waist treatment, climbing and grip state unexpectedly fit the palm, grasping there is no lack of fullness, medium and large hand type what posture is all eaten. And due to the advantages of lightweight and wireless, the control is stable and smooth, without losing precision, and the rapid stop can ignore the mass inertia.
Driver software
HyperX NGENUITY in the Windows Store manages HyperX peripherals in a unified way. HyperX NGENUITY is no different from other mouse drivers, but the UI interface is a little more beautiful, the parameters are intuitive, and the interaction is friendly to any user.
The mouse comes with 4 sets of DPI settings, in the drive, the user can increase (up to 5 groups) delete (minimum 1 group) gear, DPI progressive ladder value is 100, the maximum DPI set can reach 16000.
MouseTester
Wired 800CPI/1000Hz
Wireless 800CPI/1000Hz
HyperX Whirlwind Wireless Gaming Mouse is equipped with a PAWA3335 optical sensor (16000DPI, 450IPS movement speed and 40G acceleration), the same as the previous wired version, the tuning is relatively stable, LOD default is also controlled at 1mm, through the drive can be raised to 2mm. The 3335 is a mainstream engine platform for wireless lightweight gaming mice, with low power consumption characteristics and performance parameters in the middle range. It's just that the more popular and high-end PAW3370 platform is not adopted, which is a little regrettable.
Mouse disassembly
HyperX Rotary Wireless Edition should pay attention to the snap when disassembling, because the upper and lower covers of this mouse only have two fixing screws in the tail foot sticker, and the fixing of the front part is by the snap, you need to catch the upper cover, and at the same time tighten the sides and pull back to separate the upper and lower covers.
TTC dustproof gold micro-movement
Side key Kaihua red dot micro-movement
DPI key nudge
NRF52833 RF scheme
Through disassembly, some special findings have been made that the internal structure is very different from the wired version. First of all, although the micro motion is still TTC's dustproof gold micro motion, the publicity life has increased from 60 million times to 80 million times. Secondly, the side button was also changed from HCNHK gray dot micro-movement to Kaihua's red-dot micro-movement. The DPI key is a blue dot nudge. RF SOCs are NRF52833 solutions, and SOCs theoretically support Bluetooth, perhaps a reservation for subsequent higher-order versions.
Usually, as long as you continue to tighten the screws, you can remove the protective cover and see the battery and the PAWA3335 optical sensor inside, but this time HyperX took a very aggressive approach, they chose to use adhesive to glue the sealing cover with the PCB, forming a sealing compartment to ensure that any dust and water droplets will not penetrate into the core components, which is why the HyperX Rotary Wireless Mouse can do IP55. Because of this, if you choose to forcibly pry open the protective cover, it will definitely destroy the PCB, and the mouse will be scrapped, or click to the end.
The wireless version was released after a year and a half, in fact, because HyperX redesigned the internal structure of the mouse during this time. Even, even the secondary board and the motherboard are welded between a part to replace the previous data line, can not separate the secondary board, and the LED light module switched to the cable, the purpose of this is probably to reduce weight.
Lighting effects
Write at the end
Compared with the wired version, the internal structure of the hyperX Whirlwind Wireless Edition mouse has been fully optimized, and the protective cover is completely sealed to achieve the dustproof and waterproof effect of IP55. "Old bottle of new wine" can be very good to describe the HyperX Whirlwind Wireless Edition of the game mouse, a net weight of 61g, in the lightweight gaming mouse is also among the best, more powerful is that the battery in this body, can provide 100 hours of endurance, wireless party ecstasy!