The traditional interstitial seat screen is composed of two parts, the upper half of the vertical material is framed with a screen center, and the structure is independent, called the screen surface or screen fan.
The lower half is the screen seat, with thick wood as the pier, the upper column is erected, and the two sides stand against the teeth. The two columns are then connected by horizontal firs, with a tapestry ring plate embedded in it, and the bottom of the column is covered with water teeth.
The size of the components on the base adds up to no less than ten pieces, which are connected to each other by ten ten ten, which is much more complicated than the screen fan above.
A small interstitial screen on the case encountered not long ago, with its small size and light weight, integrates multiple components on the base together and condenses it into three modules, the overall charm is not reduced, and the structure is refreshing and concise.
Huanghuali carved animal face pattern inlaid with copper small seat screen, length 22 width 11 height 23 cm, broken dynasty for the middle of the Qing Dynasty, the front is square, the proportion is coordinated, the ornamentation is decent, and the ancient meaning is thick.
The screen seat is divided into two vertical and one horizontal three parts, the structure is special, there is no figure-eight open water teeth under the maple, and the specific situation will be explained later.
On the side of the screen seat, the ancient craftsmen used a thick plate to cut out the contours of the order, imitating the bridge piers, bottle shapes and rising clouds, and embossed dragon pattern decoration, combining the originally separated columns, standing teeth and seat piers into one.
The horizontal and ring plates connecting the left and right have also been reduced to a whole plate, with a relief animal face pattern in the middle, and the echo pattern fills the rest, and the composition is exquisite, similar to bronze.
The lower edge of the transverse plate protrudes beyond the base edge of the pier, perhaps representing a water-clad tooth that goes straight down.
The side plate is double-sidedly carved, and the chiseled holes in the hammer eye are connected to the mortise tongue at both ends of the horizontal plate.
The inner surface is also slotted, and the screen fan is inserted from top to bottom and falls on the horizontal plate.
The horizontal and vertical grid corners of the screen are framed, the edge line is mixed, and the lower half of the two sides is shoveled off the front and back skin, leaving a square ridge raised in the middle for insertion into the slot of the screen seat.
The screen frame is set with a natural plate center, and the texture is difficult to distinguish for a while. According to the introduction, this is a copper-embedded interstitial screen, so there may be a possibility of copper surface.
The small interstitial screen is full of vicissitudes and old-fashioned, and the estimated value is 40,000 to 60,000 yuan.