The design of the air conditioning system of the clean medicine laboratory should start from the calculation of the indoor cold and heat load, we need to understand what kind of process equipment should be arranged in all kinds of clean medicine laboratories, understand the various process links and process technology requirements of the experiment and the various laboratory equipment required.
Clean medical laboratory
The experimental instruments commonly used in aseptic laboratories are: constant temperature incubator, carbon dioxide incubator, ordinary refrigerator (freezer), cryogenic refrigerator (freezer), ultra-low temperature refrigerator (freezer), shaker, centrifuge, ultra-clean table, laminar flow cover, etc. Commonly used experimental instruments in PCR laboratories (gene amplification laboratories) are: ordinary refrigerators (freezers), cryogenic refrigerators (freezers), ultra-low temperature refrigerators (freezers), centrifuges, electrophoresis tanks, cyclers, ultra-clean workbenches, fume hoods, biosafety cabinets, etc. The commonly used experimental instruments of pet centers (positron emission computed tomography imaging centers) are: hot chamber binning. The experimental instruments commonly used in biosafety laboratories are: constant temperature incubator, carbon dioxide incubator, ordinary refrigerator (freezer), cryogenic refrigerator (freezer), ultra-low temperature refrigerator (freezer), shaker, centrifuge, plate washer, microplate reader, electrophoresis tank, program cooling system, ultra-clean workbench, biosafety cabinet, laminar flow cover, movable sterilizer, single-door sterilizer, double-sided sterilizer, etc.
Ultra-clean workbench
The design of the biosafety laboratory should fully understand the hazard level of biological factors, select different protective equipment according to different hazard levels, design corresponding protective facilities, select suitable buildings, structures, air conditioners, water supply and sewerage, power distribution and automatic control facilities. The clean medicine laboratory should design three types of streamlines: personnel flow lines, clean logistics lines, and dirty logistics lines. As far as possible, the flow line of personnel and the flow of goods are separated, especially the entrance of clean goods, the outlet of dirt and the import and export of personnel need to be set separately. Logistics entrances and exits in places with limited floor area can be replaced by pass windows. The route of human flow in Level III and IV biosafety laboratories shall comply with the principles of air cleaning technology on pollution control and physical isolation.
Clean laminar flow hood
The transmission windows used in sterile rooms, PCR laboratories and PET centers can be equipped with ordinary transmission windows, and ultraviolet disinfection lamps are provided in the transmission windows. The transmission window used in the biosafety laboratory needs to be determined according to different laboratory grades and the installation site of the transmission window, the sealing of the external transmission window in the experimental area is good, and it can have its own cleaning and disinfection functions, and the transmission window inside the experimental area can use ordinary transmission window.
Air shower room_air shower door_transmission window_weighing cover_air shower room manufacturer price-Suzhou Rongdaxing Environmental Technology Co., Ltd. specializes in the production of ultra-clean workbench, laminar flow cover, wind shower room, transmission window and other air purification equipment, welcome to consult cooperation and exchange.