preface
Not long ago, the charging head network opened the box for everyone to drill together, and the use of USB-C interface charging began to become a new trend of charging power tools. This time for everyone to open the box of the little monkey brushless drill is also the same, lithium battery power, using USB-C interface charging, the function is not bad, the details are different, the following for everyone to open the box of this small monkey version of the hand drill.
Product introduction
Heaven and earth box packaging, simple front printing with the appearance of the product and HOTO logo, 12V brushless motor is the biggest selling point, power and durability are guaranteed.
Inside the package is a plastic shell printed with chicken broth.
The accessories inside the package are self-explanatory, hand drills, drill bits, batch heads and charging cables.
The charging cable is configured for A2C interface and injection molded with a one-piece terminal housing.
The length of the charging cable is about 52cm.
Silver gray engineering plastic shell with TPU material non-slip, this shape is familiar. The buttons, like the gamepad, support infinite adjustment and adjust the speed according to the key range. Next to the buttons are locking and direction shift switches.
On the top, there is a toggle switch in drilling and screw mode.
The left and right buttons in the display area can adjust the speed, the maximum torque is 30N.m, and the maximum speed is 1400rpm. The following circular buttons can adjust the pulse mode and the optional mode. At the same time, the arrow next to the speed is a rotation direction prompt.
The white bar at the top shows the battery level.
The pulse mode is shown in the figure above.
With a charging interface and data sheet at the bottom, this hand drill has a built-in battery capacity of 2000mAh (12V) and an input power of 5V3A and 9V1.5A.
Charging compatibility testing
Let's start testing the charging compatibility of this hand drill. The first is the flash pole's 65W 2C1A Gallium Nitride charger, the output power of the USB-A interface is about 7.1V 1.57A 11.16W.
Xiaomi Mi 65W dual-port Gallium Nitride charger, USB-A interface output power of about 6.96V 1.6A 11.2W.
The hand drill is charged using an Anker 20W PD charger with approximately 6.94V 1.63A 11.33W at the input.
The hand drill is charged using the Xiaomi Mi 67W Gallium Nitride charger, and the input power is about 6.98V 1.62A 11.33W.
Full test of charging
Using the PD charger to charge the monkey 12V brushless electric drill, the power is about 13W before 1 hour and 56 minutes, and it ends in 2 hours and 10 minutes, and the maximum power is 8.94V 1.52A 13.68W.
Draw a curve of the whole charging process, you can see that half an hour of charging 23%, 1 hour of charging 47%, fully charged takes 2 hours and 10 minutes.
Charging head net summary
Monkey brushless electric drill and simple and generous modeling, engineering plastic + anti-slip TPU material combination is decent, both to take care of the weight and take into account durability; and built-in 2000mAh large capacity battery, and support 15W fast charging, about two hours can be fully charged, greatly facilitating daily use.
And the function supports drilling and screw two working modes, pulse and non-limit adjustment of two rotation modes are also practical, the overall look down this brushless drill completion is very high, whether it is carpentry, assembly furniture, brick wall punching have a good performance, home to prepare a place always useful.