Recently, Polestar brought the official picture of the Polestar 2 Arctic Circle prototype car, it is not difficult to see from the picture that the car is based on the Polestar 2 upgrade, more pulling style, Arctic Circle translated as the Arctic Circle, from the name it can be seen that the car is a model adapted to ice and snow.
The front face part is still the design style of the Polar Star family, the closed middle net with the LED headlight group of Quake brings a good sense of movement, the addition of four sets of tension lights makes the car look more wild, and the front trailer hook is also fixed on the front surround, which is very pulling style.
Body side, finishing the design of the more straight and angular, with the pull style of the modification, so that the original cross-border style Polestar 2 more wild, the body ground clearance compared to the ordinary version of the bar model increased by 30mm, the rim uses the OZ Racing brand of the pull style rim, the size of 245/35 R19 and with nail tires, further improve the vehicle's grip on the ice and snow road.
The rear part of the car, unlike the ordinary version of the bar, is still the minimalist design style of the Polar Star family, the C-shaped tail light in the middle with an LED light strip to make a penetrating effect, not only widens the visual width of the rear of the car but also brings some fashion sense, after the lower part of the encirclement uses a more scratch-resistant and wear-resistant black matte material, with a golden yellow trailer hook, very wild.