preface
There is a joke that everyone does not know whether they have heard it, how to put an elephant in the refrigerator? Three steps to get it done, open the refrigerator door, stuff the elephant, close the refrigerator door, is not very simple? If you are a new energy vehicle owner, you must have thought about installing a charging pile for yourself to save time and money. But the installation of charging piles this kind of thing can be more troublesome than elephants put into the refrigerator, applying for materials, buying charging piles, asking people to install, a pass operation seems to be extremely troublesome, making people head big.
Recently, the charging head network was invited to visit the installation process of a new bull charging pile, and we observed the entire installation process closely. The installation process is not as cumbersome as everyone thinks, so let's share the whole process with you.
Product introduction
The product installed this time is the bull safety charging pile, before the charging head network for everyone to evaluate the experience and even disassembled the bull with the car charging (in the outside emergency use), this big guy has more power than the charging gun, the two functions and scenes complement each other.
Open the package, the charging pile, the instruction manual and various accessories are in it.
The plastic bag contains the AC charging pile test report, instruction manual and charging card.
The instruction manual contains an introduction to various lighting indications.
The charging card is the ingenuity of this charging pile. Charging piles are installed in outdoor or public parking lots, it is inevitable that people will come and go, and the sharp weapon to prevent others from "chiseling the wall and stealing the light" is these two cards, and the card can be swiped to start charging, support scanning code binding, and provide users with a variety of security guarantees.
For easy installation, the box of the Bull Safety Charging Pile cleverly integrates a perforated positioning plate.
The body of the charging pile, the silver spray paint shell with the bright black indicator light area, the overall sense of science and technology is very strong.
Peel off the protective film on the surface, and the white strip in the middle can give different light prompts according to the charging situation.
Above the bull's logo is the location of the swipe card.
There is a button on the side, as well as the specifications of the product:
Model: D3-A3P16A
Rated input/output voltage: AC 380V
Rated input/output current: AC 16A
The back of the charging pile is a power contact, which greatly facilitates installation, which will be introduced below for everyone.
A hanging box for storing a charging gun.
The back panel fixed to the wall, the charging pile is installed on this back panel, and five contacts are inserted into it, which greatly simplifies the installation process.
Accessory packages such as screws.
The wire specifications of the charging pile are as shown in the figure above.
The bright surface of the charging gun body and the matte surface are spliced together, the texture is good, and it is usually inserted in the hanging box without use.
The connector is a national standard AC plug.
Button brushed texture at the top with moderate elasticity.
Wall mounting
The above is the packaging and configuration of the bull safety charging pile.
After preparing the materials, call the bull's installer to make an appointment for installation, and the installation can begin.
Install the protective pipe
The bull's installer first laid a mat on the ground, which was praised, and the debris of the hole was better cleaned up.
The first step is of course to cut off the power and start the pipe, this step needs to first plan the length and direction of the pipe, and determine the location of the charging pile installation.
Install a leakage protection switch and a charging pile backplane
After installing the pipeline, the indispensable thing for high-power electrical appliances is the leakage protection switch, and the protective shell is installed here.
The back panel of the charging pile is also installed first.
Finally, there is the back panel of the charging gun hanging box.
Install the charging gun hanging box, the matte texture is good.
Trace to leakage protection switch
After installing the pipes and backplanes, the next step is to start pulling the wires. The maximum energy consumption of the bull safety charging pile is 11kW·h, and high-speed charging naturally requires a thicker power cord.
Through the pipes arranged at the beginning, connect the wires to the electric gate, the air switch and the charging pile backplane in turn.
After a while of tossing, the master finally put such a thick wire into place.
Charging pile hanging on the wall
After installing the line, the last thing is to hang the bull safety charging pile on the back panel, even if the installation is completed, the whole process takes about two hours, if your circuit is more complicated, it will definitely be appropriately extended.
The charging pile is cleverly integrated with the trunking, and the unused cable is hung up, which can be neat and avoid accidental damage at the same time.
The swipe area below is safe and convenient for power.
Press the button to pull out the charging gun.
Places to be aware
So what do you need to pay attention to?
The first is the voltage, which needs to be paid attention to when applying for a charging pile. The bull safety charging pile supports two kinds of voltage inputs, 220V and 380V, but if you want to achieve the output power of up to 11Kw, you need 380V voltage access, and the input line is required to be more than 10 square meters to ensure the safety of long-term use.
For example, the most common installation in the residential parking space, the need for vehicle charging instructions, parking space use certificates and personal identity documents, go to the State Grid to apply, after the consent can start the installation, Bull to provide door-to-door installation one-stop service.
Finally, there is the problem of electricity charges, according to the electricity price division of different periods of peak and valley electricity, the minimum charging fee at night is 0.3 yuan per kWh, and everyone can reasonably arrange the charging time to maximize economic benefits.
Charging head net summary
After watching the installation process of the bull safety charging pile, do you still think that the whole process is very troublesome? Of course, the process of preparing parking spaces and materials can be the trickiest... The installation service provided by the bull makes the whole process smooth, the master's professional, sophisticated wiring, installation, the whole two hours on the completion, one-stop service so that the later maintenance is also guaranteed.
The charging pile is installed in the open parking lot, the power safety problem, the bull is also well considered for everyone, and two charging cards are provided randomly, which is convenient to take the power and charge it with a swipe, saying goodbye to the problem of theft. The maximum power of 11Kw increases the distance of the vehicle by 50 to 100 kilometers per hour, which is absolutely enough for household use. If you have purchased a new energy vehicle and plan to purchase a caring, easy to use and small AC charging pile for your car, you may wish to continue to pay attention to us, and then you will continue to experience the functional part of the bull safety charging pile for everyone.